Version 2.8 build 48a:
Known issues
Captions from H.264 streams are not saved correctly in archive mode
Captions carried in SCTE-20 format and written in the archive mode will sometimes be jibberish
The HTTP source runs at the rate the server will dole out data and not at the mux speed
Changed in 2.8, build 48a:
All: Added support for the Blonder Tongue MTSA device. This supports 8VSB, QAM-B, ASI and SMPTE-310M inputs and ASI & SMPTE-310M output in TSReader Pro
All: Display of the SDT version number
All: Fixed the Sencore/Dektec DTU-236 source module to correctly detect front-end lock and switch cleanly between RF & ASI inputs
All: Fixed missed DiSEqC commands on some TBS DVB-S/S2 satellite cards
Pro: Added the ability to record 10 second files in the archive function.
All: Updated to Alitronika's latest API
Pro: Fixed an issue with exporting CUE messages to XML
All: Added decoding of the resolution of H.265 video streams
All: Added chroma and luma bit depth for H.265 video. Anything above 9 bits is considered HDR
All: Added support for the TBS 5927 tuner
All: Fixed an issue where right clicking a DVB NIT and selecting "Tune to this mux" would fail on TBS DVB-S2 cards
Std/Pro: Fixed an issue with the -I switch not working on DSS muxes and dropping source module parameters
All: Improved the reliability of the H.264 thumbnail decoder
Std/Pro: Fixed a crash on XML export when hundreds of programs are defined in the PAT
All: Added support for SAT>IP tuners
https://mega.nz/#!7B1VHZhA!J1HTa6ya2d-lKSxnqTINtb0LU_kFtd_6CMe676U5TzE
Known issues
Captions from H.264 streams are not saved correctly in archive mode
Captions carried in SCTE-20 format and written in the archive mode will sometimes be jibberish
Changed in 2.8, build 48b:
All: The easy reader and widescreen flags in the ATSC caption descriptor are now displayed
Std/Pro: Fixed an issue with XML and XMLTV export where the wrong options were displayed when choosing the output file
Std/Pro: The SAT>IP source module now supports the tuner address and number on the command line in the format [tuner-address:tuner-number]
Std/Pro: Added the DVB EPG category to XMLTV exports
All: The HTTP source module now understands .m3u files without the need for them to be described by an HTML 5 <video> tag.
All: HLS/MPEG-DASH live streams are now supported by the HTTP source module
Pro: The ccextract command-line utility now processes captions from H.264 video
Pro: XML export now includes SCTE 35 cue messages in raw hex format
Pro: The Stream Monitor window is now bigger so the entire alarm text gets displayed
Pro: Added a button to copy all the Stream Monitor alarm text to the clipboard
Pro: Added a function to the Stream Monitor to generate an alarm if a certain PID's bitrate drops below a certain level. This level can be set by clicking the Settings button in the Stream Monitor window
Std/Pro: Added the ability to save MPE IP data not carrying UDP or TCP traffic
Pro: Added the ability to log all SCTE-35 messages into a comma separated file
Pro: Fixed an issue where H.264 captions would sometimes be gibberish if B slices were present - fix applies to both TSReader and the ccextract command-line program
https://mega.nz/#!rMEjkIRB!1wDPkFDzWr9qO7PsKoJ7m2vYHs2MwA0cl9fL9mU_R5g
Version 2.8, build 51:
All: The Alitronika ASI source module now supports the AT4R1 ASI to USB adapter
All: The HDHomeRun DVB-T source module now works correctly with DVB-T2 signals without reporting a false failure to lock
All: Recording and playing streams with E-AC3 audio now correctly records the audio stream
Std/Pro: Improvements to the H.265 decoder. Interlaced video is now decoded correctly
Std/Pro: Fixed an issue when exporting to XML where a long rating string in an EIT event could corrupt the event's start date
All: H.264 and H.265 decoders now display a "Wait..." thumbnail before the thumbnail is decoded. MPEG-2 video decodes very rapidly but H.264 and especially H.265 with a 4K picture can take a second or more to get a thumbnail. This makes it much clearer that TSReader is working on it
All: The YUV to RGB conversion required to get a thumbnail on MPEG-4, H.264 and H.265 video is significantly faster
Pro: Fixed an issue with CEA-708 caption service numbers greater than six
All: DVB NIT entries in the tree-view now display the network name if transmitted
All: The DVB NIT maximum multiplexes was 2,048. This has now been increased to 8,192 to handle some European DVB-C networks
All: Added support for the ASI input port on the Alitronika AT-290 DVB-S modulator
Std/Pro: Added the ability to view the MPEG-2 start codes or the H.264/H.265 NALU codes. This can be very useful for finding strange problems in video streams especially when some NALU codes are missing
All: Added option to right-click a "Decoder Disabled" thumbnail in order to enable that decoder
Std/Pro: Right clicking a video thumbnail now displays menu options to allow quicker access to decoder settings, offers to refresh thumbnails and allows the thumbnail size to be changed
Std/Pro: Changing the thumbnail size now refreshes the thumbnails
All: Alitronika input ASI devices that use DvsStation V4 are now supported using the AlitronikaASI_v4 source-module
All: Added support for the TBS 690A four-port ASI input card
Pro: Cleaned up the caption decoder messages and made the caption display easier to read by adding some color
All: Some DVB-T NIT entries carry terrestrial system delivery decoder that's all ones (which means reserved). This was incorrectly shown as -0.0MHz
Std/Pro: The RTP and HRTP source modules now count the number of RTP packets lost at the IP level
Pro: The RTP and HRTP source modules can now log the RTP packet loss to a comma-separated file
Pro: TSWatcher: Added the ability to include thumbnails in the alarm report
Pro: TSWatcher: Added a new function to generate a standalone webpage containing thumbnails from all multiplexes being monitored
All: Fixed an issue where service names on DCII muxes would sometimes be blank
All: Depreciated support for Dish Network switches and changed the code to support DiSEqC 1.1 switches instead which support up-to 16 satellite inputs
All: Updated links to reference the new tsreader.com website
Std/Pro: Removed documentation from the installer. TSReader documentation is all on-line now
Lite: Video resolution is now exported to HTML for H.264 video
https://mega.nz/#!vQd0zBTD!sb-EZnbFxbl7AJNAQ2SEzVxL7VX3Fc_RmdnxQjRlvV0
https://mega.nz/#!zIBhVIyR!QCeRTfBmzpGCsGx_x8R6R6raLbIWoO8OxV9CR0CnCvo