Actualizar MicroBox dongle
28.11.2010
Below are a detailed steps, about how to update the MicroBox dongle.
Step 1:
- Connect the MicroBox dongle to the power, and make sure its turned on ( Red light inside it ), after that connect the serial port from the MicroBox to the serial port, in your PC.
Step 2:- Download the cleaner software for the downloads section, then open the .rar file and you should be able to see the below files, open the cleaner.exe file.
Step 3:- After you have the program opened click START button, then you should see that a
"Waiting Boot..." is showing up near the software title, as the below image shows.Step 4:- Now unplug the power cable from the dongle for 2 seconds then plug it again, into the MicroBox, after that you should be able to see the progress bar increasing and the cleaning process is started, as the below image shows.
Step 5:- Once the cleaning process reaches 100%, you are good so far, unplug it again from the power for 2 seconds then plug it again.
Step 6:- Now download the software that you want to install from the site, then open the .rar file as below.Step 7:- Open the .exe file, which is the software it self.
Step 8:- After you have the program opened click START button, then you should see that a "Waiting Boot..." is showing up near the software title, as the below image shows.
Step 9:- Now unplug the power cable from the dongle for 2 seconds then plug it again, into the MicroBox, after that you should be able to see the progress bar increasing and the transferring process is started, as the below image shows.
Step 10:- Once the transfering process reaches 100%, you are good so far, unplug it again from the power for 2 seconds then plug it again, and by this you have the software installed at your MicroBox Dongle.
Hope this was useful for you.
mohammed tanko
microbox_cleaner.rar[archivo adjunto borrado por el administrador]
Proceso de carga de firm en microbox I
Procedemos de la siguiente manera
Eutelsat w3
7E
tp de datas:
11492/V/30000 /TRT1 .TRT HABER /
11534 /V/30000/TRT3/
Astra1G
31.5E
tp de datas:
11817/V/27500/ kanal2000
12304/H/27500/sport1.KDRTRTK.EKO TV/
Helasat
39E
tp de datas:
12565/H/30000/Folklor tv /
12688/H/30000/ kanal3/
Eutelsat w6
21.6E
tp de datas:
10972/V/ 2170/Baghdad tv channel
11004/H/2592/KNN channel
11530/H/2857/Alrai tv
En caso de no coger datas por w3
1.Encienda microbox.
2.Mira al menú de microbox en la tele.
3.Coge el mando y apreta el botón rojo(audio).Te pregunta si quieres poner todo a configuración de fabrica en ingles.Pones si.
4.Apretas botón menú en mando de microbox mirando a la tele.Sale subventana,abajo pone w3,lo cambias por w6.Apretas botón ok en el mando.
5.Apretas otra vez botón menú en el mando.Otra vez cambias a w3.Pulsas ok en el mando.
6.Ahora enchufas tu deco y mira por ej los jsc por hotbir o nilesat
by salva1972