How to get into the bios [DM 800SE]! ! ! The box must depend on a DHCP server! ! !
1. First, the box shut down and unplug it (at least 1 minute)
2. Power button on the front page and insert the Box
3. Appears on the display xxx.xxx.xxx.xxx DHCP (IP address) *** STOP ***
4. In the Window's Start -> Run -> go and telnet
followed by the IP box type. (E.g., telnet 192.168.2.122) per
configuration on the network
You will get the bios of the box.
Gracias a
Mr.Bunny