nuevo firmware con fecha 23-09-2016, con nuevo protocolo TIKS V2.
RS8100HD
SEP 23 2016
New Protocol and automatic upgrades.
check feature
system setup / others / sw checking
if you change the database, you should re-enable this feature to have
sw update checking.
###########################################################################################################
Features:
IMPROVED VERSION !!!
v0071.0410
- Beinliga HD 1, 2 & 3,4,5,6,7,8 and BeinMAX 4,5,6,7,8,9 & 10 (Astra 19º).
- Support forM.PARTIDAZO HD & SD.
- Support for MOVISTAR F1 + MOTOGP channels (Astra 19º).
- Support for Canal+France
- Support for porn channels, Red Light and Hustler (Hotbird).
- Support for TAQUILLAS and TAQUILLA X (weekends).
- Support for TIVUSAT channels (Hotbird).
- Support for SRG_SSR (Hotbird).
- Support for HD+ (Astra 19º)
############################################################################################################
FAVOURITES LISTS
FAV1 --> C+HD
FAV2 --> C+SD
FAV3 --> TDT
FAV4 --> MOVISTAR+SPORTS
FAV5 --> FRANCE
FAV6 --> X
FAV7 --> TIVU
FAV8 --> SRG-SSR
FAV9 --> HD+
############################################################################################################
Use good quality FLASH disk with best read/write performace to avoid damage STB, formatted at FAT32 file system and totally erased device. Copy the ".abs" file on to the root (/).
IMPORTANT: Disconnect STB from INTERNET and SAT signal during upgrade.
TIKS is already ENABLED by default, so if you are comming from a OFFICIAL SW but you have problems with it press MENU --> CONFIGURATION --> INFORMATION --> and press "7777" to enable the hidden menu. TIKS has to be ENABLED only. You have to configure your network by WIFI dongle or Ethernet cable, (if USB WIFI dongle is connected but not in use because you want to use Ethernet cable you have to DISABLE WIFI it first).
UPGRADE PROCESS:
1.- Extract ".abs" file into root folder (/) using a Flash disk device.
2.- Insert USB disk on "USB" port slot.
3.- Go to TOOLS option inside menu, then select UPGRADE BY USB option. Select USB drive.
4.- Select "FW" update file (*.abs), press RED button (upgrade), and select "Full Upgrade". Wait until SW will be upgraded!!!
5.- Wait until RS8100HD reboots, dont touch any remote commander key.
COMMON OPTIONS:
MENU --> CONFIGURATION --> INFORMATION --> press "7777" (TIKS, NewCamd Client, NewCamd Server, CCCAM).
INFO:
There are the following upgrade/backup methods:
* For automatic upgrades :
check feature
system setup / others / sw checking
if you change the database, you should re-enable this feature to have
sw update checking.
Full Upgrade --> "ALL FLASH" mode, maincode (firmware) + user data base.
Normal Upgrade --> Only maincode update (firmware), existing user data base will be preserved.
Userdb --> Update only the user data base contained on that .abs file.
Backup (GREEN button) --> To make a backup of your existing maincode + user data (AllCode).
saludos