UR18 for TM9100 / TM9101 (Super) TM9100-TM9100 Super update UR18
- This is for TM-9100 and TM-9100Super (TM9101).
There is no need to rename the file.
We recommend to install the image into the flash,
not into MMC as the new UR 18 drivers may conflict
with old versions.
We also recommend to use the latest Technomate
Control Center 7.1. With this Loader, you will not need
the extra files (found in the older versions), you just
download the 1 file, so it is much easier to install.
Thx to barryr
For super version
Unpack to newly formatted mmc/sd card,
1. Turn off the TM9100 at the back
2. Turn on the tm9100 from the back while holding the up ^ button on the front panel.
3. Carry out a factory restset
4. Turn off the TM9100 at the back
5. Inset the MMC/SD card
6. Turn on the tm9100 from the back
The TM9100 should not start the upload, leave it alone until you see done on the front panel, remove the MMC/SD card and restart