Perdone insista pero no quiero meter la pata,como se mete como el malasyk normal desde usb?,es el que queda arrancado como kodi?,gracias.
No lo tengo en el KI ya que tiene el nuevo Kernel, pero si en el KIII
Installation:
Use a MicroSD formatted in FAT32 and write 3 files from the archive (
KI_PRO_Malaysk_v_6_3_20180814.zip, factory_update_param.aml, recovery.img ).
With the power on the box turned off, use a needle to push the button through the bottom, then reconnect the power.
Release the button after ~5 seconds and wait for new firmware to load.
The first boot will take longer.
We save and copy it to the SD Card with the replacement of the original file. All your data and settings will be saved when flashing.
Instalación:
Utilice una MicroSD formateada en FAT32 y escriba 3 archivos desde el archivo (KI_PRO_Malaysk_v_6_3_20180814.zip, factory_update_param.aml, recovery.img).
Con la alimentación de la caja apagada, use una aguja para presionar el botón a través de la parte inferior y luego vuelva a conectar la alimentación.
Suelte el botón después de ~ 5 segundos y espere a que se cargue el nuevo firmware.
La primera bota llevará más tiempo.
Lo guardamos y lo copiamos en la tarjeta SD con el reemplazo del archivo original. Todos sus datos y configuraciones se guardarán al parpadear.