activar tarjeta viaccess

Buenas tardes compis,

tengo un vu+2duo con imagen blackhole, compre una tarjeta viaccess de freesat.ro y no logro activarla. Tengo instalado sbox005-4.1 con Mgcamd 1.38 y mi configuración es esta:

[main]
server_only=0    # 0=emu+newcamd server 1=only newcamd server
log=0    # 1=no log 1=log to /tmp/sbox.log   //ALWAYS USE 0//
logudp=192.26.0.1:3354    # server ip:server port
userspath=/var/bin/users.sbox    # users list
channelinfo=/var/bin/sbox.channelinfo   # channel info
webinterface=1    # 1=web interface on 0=web interface off
webadmin=admin:edk    # user:pass for webinterface
webport=81    # web interface port
radegast=0:16050    # 0=radegast server off - 1=radegast server on : radegast server port
use_nagra=0    # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=1800:0000;0100:1111:2222    # prio caid for dvbapi,caid1:prov1;caid2:prov2:prov1
cccam=0:18000    # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1    # 0=betatunnel support disabled 1=betatunnel support enabled
#autorestart=    # if you want, sbox can auto-restart every day, example: autorestart=05:15

[slot0]
active=1    # 0=inactive 1=active
sci=/dev/sci0    # lower
ncdserver=1    # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314    # newcamd deskey
port=20000    # newcamd port
mhz=500    # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER. Example: mhz=357, mhz=368
reader=1    # 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
cache=0    # how many ecms can be cached, 0 or less=cache disabled

#Viaccess Example
[XXXXXXXX]    # via camid (4 bytes)
emm=7    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0    # use portlist or no
portlistpath=    # path from port.list
aeskey=    # aeskey used by nano d2, example: aeskey=01:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA;09:BBBB BBBBBBBBBBBBBBBBBBBBBBBBBBBB
d2_xor=    # used by nano d2 (64 byte)
d2_perm=    # used by nano d2 (16 byte)
d2_mul=    # used by nano d2 (16 byte)
d2_tra1=    # used by nano d2 (256 byte)
d2_tra2=    # used by nano d2 (256 byte)
d2_tra3=    # used by nano d2 (256 byte)
d2_tra4=    # used by nano d2 (256 byte)
d2_byte=    # used by nano d2 (1 byte)
controlsid=0:0    # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid

me podríais decir si está correcta la configuracion o me falta o sobra algo??

Gracias y salu2