PadreDeFamilia

QVIART DUAL : SATELITE 4K ANDROID 9.0 DVB-S2X+DVB-T2+DVB-C+IPTV

Chincheta Autor Tema: errores al recuperar engelmini con TERATERM!  (Leído 1987 veces)

Registrado:
21/12/2012
Gracias:
1/12
Mensajes
9
Buenas,

Vereis llevo ya a mis espaldas un monton de engels recuperados, pero llevo ya como 6 diferentes en el que teraterm me tira un error al grabar el firm,he probado de todo, cambio de puerto usb, firm, quitado pletina de la clavija, en fin nose,el dec conecta pero al grabar da error y no reinicia el deco, alguna idea? os paso el tocho que me marca el error.

Puede ser por firmware? Mira que he probado varios eh, pero nada...error al grabar el firmware el teraterm, pero en 2 decos que tengo ahora mismo, y mira que ya he recuperado varios desde mismo pc y todo, no entiendo q me esta ocurriendo, incluso actualmente los 4800hd con mismo cable y pc tambien los recupero sin problema, no entiendo nada. Alguna idea?

Quiza el tema está, en que el error viene xq instalo septiembre 2013 y despues tendria seguidamente ponerle el de fabrica? cosa que no he probado eh, o eso da igual y deberia reiniciar y arrancar el deco con tan solo meter firmware de septiembresin necesidad de meter despues el de fabrica?




>> wujiang-->_burn_SSU_image:Start to write flash...

>> Check image parity...

>> Unzip Image Start....
>>
 App Start...

[cyg_net_init] Init: mbinit(0x00000000)
[cyg_net_init] Init: cyg_net_init_devs(0x00000000)
Init device 'eth1'
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: cyg_ppp_pppattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x80d7a570)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x80d7a074)
New domain route at 0x00000000
[cyg_net_init] Init: call_route_init(0x00000000)
[cyg_net_init] Done
[USBSerial_Init:245]:   $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$IN

nvt3g usb serial version[ver:1.01.44-nvt3g]
[USBSerial_Init:262]:   $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$OUT
Uart initialize Success
init time1 interrupt
init time2 interrupt
init time3 interrupt
init time4 interrupt
init time5 interrupt
MPLL frequency = 399999916
liujiajia----->ID=0x1c16,line=1923



ReadID 0x9E 1104  0x40 RD_REG =0x00  u32RD_Value = 0x00, ID = 0x00

ReadID 0x9E 1124 ID  =0x00  ManufacturerID = 0x00, DeviceID = 0x00

 {DRV_FLASH_Initialize} Manufactory Code=0x1C, DeviceID=0x16
Flash Pass
target frequency = 13880, I2C Clock Div = 22a
I2C0 Pass
target frequency = 30d40, I2C Clock Div = dd
I2C2 Pass
FP Pass
 >>>_drv_init,1284,At boot, ID=0, Wakeup event=0x0
STBC Misc Pass
STBC IPC Pass
STBC IO Pass
STBC RTC Pass
STBC PBC Pass
STBC Ir Pass
E2P Pass
ADC Pass
NIM0 start to INIT O
NIM0 pass  !
NIM1 start to INIT O
[src/board/dr78326su_v30/plat_ini.c]NEO Pass






NEOWINE Init Success!
S NIM Pass
TSPU Pass
STC Pass
VDEC Pass
ADEC Pass
Video Layer 1 Pass
Video Layer 2 Pass
Video OSD 1 Pass
Video OSD 2 Pass
Cursor  1 Pass
Blit Pass
JPU Pass
DeviceName = VMIX0
VMIX Pass
TVE Pass
DeviceName = VTG0
VTG Pass
Pin collision with PFCR: Port:J, Bit:0x10
Result: **** PASS ****
1.0: DRV_SMC_Initialize() = SMC_OK
   -->DRV_ETH_Init PASS
<<< start to do USB initial >>>
[ver:1.21a.01-WIFI]
[ver:1.21a.01-WIFI]
Creat MAU Interrupt Done
checkMemPoolSize:u32TotalPoolSize = 48758784,u32MemSize = 52428,gu32MaxMemSize = 113457558,line = 66

checkMemPoolSize:u32TotalPoolSize = 48811212,u32MemSize = 15728640,gu32MaxMemSize = 113457558,line = 66

checkMemPoolSize:u32TotalPoolSize = 64539852,u32MemSize = 2097152,gu32MaxMemSize = 113457558,line = 66

checkMemPoolSize:u32TotalPoolSize = 66637004,u32MemSize = 2097152,gu32MaxMemSize = 113457558,line = 66

checkMemPoolSize:u32TotalPoolSize = 68734156,u32MemSize = 7969177,gu32MaxMemSize = 113457558,line = 66

checkMemPoolSize:u32TotalPoolSize = 76703333,u32MemSize = 5997854,gu32MaxMemSize = 113457558,line = 66

8051 Boot and goto While 1 loop ~~~~~

 STBC SW Date:1018182012
 STBC SW Ver:26198


 FP_EventSubscribe: Handle = 83d2ceb8
>> PBC Open
DeviceName = VMIX0
DeviceName = VTG0
VTG_SetMode, VTGTiming => 2001
[PARSER]PLAT_PARSER_Register_Interrupt_Handle Enter
 >>>_plat_init,2471,At boot, ID=0, Wakeup event=0x0
checkMemPoolSize:u32TotalPoolSize = 82701187,u32MemSize = 3145728,gu32MaxMemSize = 113457558,line = 66

checkMemPoolSize:u32TotalPoolSize = 85846915,u32MemSize = 3670016,gu32MaxMemSize = 113457558,line = 66

checkMemPoolSize:u32TotalPoolSize = 89516931,u32MemSize = 1048576,gu32MaxMemSize = 113457558,line = 66

checkMemPoolSize:u32TotalPoolSize = 90565507,u32MemSize = 2097152,gu32MaxMemSize = 113457558,line = 66

RegisterWifiConnectCallback=0x80a5bca0
RegisterWifiDisconnectCallback=0x80a5bcd0
BMT[01]=00, del=00
BMT[02]=01, del=00
BMT[03]=02, del=00
BMT[04]=03, del=00
BMT[05]=04, del=00
BMT[06]=05, del=00
BMT[07]=06, del=00
BMT[08]=07, del=00
BMT[09]=08, del=00
BMT[0a]=09, del=00
BMT[0b]=0a, del=00
BMT[0c]=0b, del=00
[ver:1.01e.44-USB]
irq_num = 35 controller added
ehci_local0: EHCI version 1.0, with 1 ports.........
ehci_local0: USB revision 2.0
ehci_local0: new device port=0 depth=0 speed=high
uhub0
uhub0: 1 port with 1 removable, self powered
irq_num = 36 controller added
ehci_local1: EHCI version 1.0, with 1 ports.........
ehci_local1: USB revision 2.0
ehci_local1: new device port=0 depth=0 speed=high
uhub1
uhub1: 1 port with 1 removable, self powered
os_notify: Host bus 80d3d5ec going into suspend
uhub1: new device port=1 depth=1 speed=high
ucompdev0
jusbWifi_match_proto: UMATCH WIFI Dongle
jusbWifi_attach: vid 0x148f pid 0x5370


=== pAd = 0x8402acc0, size = 1081392 ===

rausb_buffer_alloc size=122884
rausb_buffer_alloc size=122884
rausb_buffer_alloc size=122884
rausb_buffer_alloc size=122884
rausb_buffer_alloc size=3844
rausb_buffer_alloc size=3844
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
<-- RTMPAllocTxRxRingMemory, Status=0
############# RESET ALL CB
<-- RTMPAllocAdapterBlock, Status=0
NvtWifi_GetInsCallback = 0x804cfdf8
NvtWifi_GetRemCallback= 0x804cfe48
NvtWifi_GetConnectCallback= 0x804cfe90
NvtWifi_GetDisconnectCallback= 0x804cfec8
 Init USB Dev Config
 Open USB Pipe
Init USB Dev Config End
&__NETDEVTAB__[0]:80d8d5a0 &__NETDEVTAB_END__:80d8d5c0
sc->dev_name:eth1
USB Init net_dev=0x80d79844
CMD_RTPRIV_IOCTL_USBDO_INS_CB call USB insert callback pAd->usbInsCb=0x804cfdf8
checkMemPoolSize:u32TotalPoolSize = 92662659,u32MemSize = 2097152,gu32MaxMemSize = 113457558,line = 66

maintask:MID_INI_Initialize success

Now init app nvm 7520 5188

 CheckVersion=1,NSCheckData = 0

 EN_APP_NVM_NO_ERROR
maintask: after APP_NVM_Init

No such table in  sharebank !table id=0xc0
IR initialze error
MID_EZM_GetCustomizeParam 0
######### rt_ecos_start
MainVirtualIF_open pAd=0x8402acc0
VIRTUAL INTERFACE UP  number = 0
rt28xx_open pAd=0x8402acc0
 Start WIFI Driver rt28xx_init
 rt28xx_init read MAC version
MAC_CSR0  [ Ver:Rev=0x53900502]
 rt28xx_init RT28XXDMADisable
rt28xx_init RTMPInitTxRxRingMemory
rt28xx_init RtmpMgmtTaskInit
######## Attach pTask pTask->stack=0x83f69cd8
######## Attach pTask 1
######## Attach pTask->threadID=0x83f69bb8
######## Attach pTask pTask->stack=0x83f68a78
######## Attach pTask 1
######## Attach pTask->threadID=0x83f68958
######## Attach pTask pTask->stack=0x83f67838
######## Attach pTask 1
######## Attach pTask->threadID=0x83f67718
rename_RTMP_TimerListAdd: add timer obj 840d8ad0!
rename_RTMP_TimerListAdd: add timer obj 840d8b08!
rename_RTMP_TimerListAdd: add timer obj 840d8b40!
rename_RTMP_TimerListAdd: add timer obj 840d8a98!
rename_RTMP_TimerListAdd: add timer obj 840d89f0!
rename_RTMP_TimerListAdd: add timer obj 840d8a28!
rename_RTMP_TimerListAdd: add timer obj 84060c04!
rename_RTMP_TimerListAdd: add timer obj 8402ce1c!
rename_RTMP_TimerListAdd: add timer obj 8402ce5c!
rename_RTMP_TimerListAdd: add timer obj 84060cc0!
rename_RTMP_TimerListAdd: add timer obj 8402ce98!
rename_RTMP_TimerListAdd: add timer obj 84060b94!
rename_RTMP_TimerListAdd: add timer obj 84060c84!
######### Clear fOP_STATUS_INFRA_ON 3
rt28xx_init RtmpNetTaskInit
########## RtmpNetTaskInit net_dev=0x80d79844
-->RTUSBVenderReset
<--RTUSBVenderReset
RTMPSetProfileParameters set WPA_802_1X_PORT_NOT_SECURED
Key1Str is Invalid key length(1) or Type(0)
Key2Str is Invalid key length(1) or Type(0)
Key3Str is Invalid key length(1) or Type(0)
Key4Str is Invalid key length(1) or Type(0)
1. Phy Mode = 5
 rt28xx_init 1.Phy Mode = 5
2. Phy Mode = 5
 rt28xx_init 2. Phy Mode = 5
NVM is Efuse and its size =2d[2d0-2fc]
phy mode> Error! The chip does not support 5G band 15!
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 9
 rt28xx_init 3.Phy Mode = 9
<Not a string: 0x80E820B0>AsicSetRxAnt, switch to main antenna
bAutoTxAgcG = 0
MCS Set = ff 00 00 00 01
rt28xx_init  NumOfBulkInIRP = 1
<==== rt28xx_init, Status=0
<==== rt28xx_init, Status=0
 clear garbage interrupts 0x1300 = 00064300
######### rt_ecos_start end
MAC address: 00:0c:a1:10:b6:5a

[DEC] vid dec type support enDecType[0x2]
[DEC] vid dec type support enDecType[0x2]PLAT_MEM_Malloc: Malloc fail! : Handle = 0x83cb31a0, Size = 8912896

AVCTRL_AllocMem : malloc memory fail,line = 7412


[     VPool] handle:0x83cb31a0, range:0x812b3124-0x83cb3114, total:44040192, free:631680, minfree=631680
[0000,       free]: begin: 0x812b3124, size: 631680
[0001,  allocated]: begin: 0x8134d4a4, size: 2101264
[0002,  allocated]: begin: 0x8154e4b4, size: 34801680
[0003,  allocated]: begin: 0x8367ecc4, size: 5246992
[0004,  allocated]: begin: 0x83b7fcd4, size: 1258560

[DEC] PLAT_DEC_SetVideoDecodeType, allocate fb fail(want 0x880000)
[DDC_DEC] mid_ddc_SetVideoType errPLAT_MEM_Malloc: Malloc fail! : Handle = 0x85256280, Size = 1048576

AVCTRL_AllocMem : malloc memory fail,line = 7412


[     APool] handle:0x85256280, range:0x85056204-0x852561f4, total:2097152, free:600176, minfree=600176
[0000,       free]: begin: 0x85056204, size: 600176
[0001,  allocated]: begin: 0x850e8a74, size: 196880
[0002,  allocated]: begin: 0x85118b84, size: 1056
[0003,  allocated]: begin: 0x85118fa4, size: 82192
[0004,  allocated]: begin: 0x8512d0b4, size: 131344
[0005,  allocated]: begin: 0x8514d1c4, size: 32800
[0006,  allocated]: begin: 0x851551e4, size: 1052688

[DEC]
 AVCTRL_AllocMem fail ES

[DDC_DEC] mid_ddc_SetAudioType err
[DDC_DEC] mid_ddc_StartAudioDecoding err
----------MID_DDC_OpenTuner 0------------------


----------MID_DDC_OpenTuner 1------------------


----------MID_DDC_OpenTuner 0------------------

 PowerOn = 0
maintask: mac from SettingPara:maintask: mac from otp:APP_CFG_SaveSettingPara: line = 3085

Now APP_NVM_WriteAPPSettings ,POS=0 , size=116
maintask: order id from otp:e 5 1e


 APP_Ctrl_Web_Init start!!!!1
Cannot engage Mobile font: ArInitFont () failed
 error code (see bi_lib.h  BI_ERROR_xxx): -51

 Load_Default_Cfg_Setting_Extend_Parathe:syn = 0xA55AC33C,syn_end = 0xA55AC33C
[asc_Network_DumpStartInfo][634]###Netif param:mode if:0 ###
[asc_Network_DumpStartInfo][638]###Netif param(eth):dhcp:1 ###
[asc_Netw
 normalork_DumpStartInfo][639] get default cfg=3
[MMI] vid192.168.001.100 ###nter normal
[MMI] vid support enD        ecType[0x10]               ]
               MI] vid support enDecTy
[MMI]           vid support e          t enDecType[0x1]
[MMI] vid                 ]
[MM                    [MMI] vid support enDec          Type[0x4]
              I] vid support enDecTyp
[MMI]         vid support enD          t enDecType[0x6]
[MMI] vid s
[MMI]                    MI] vid support enDecTy          pe[0x1]
               vid support enDecType[
[MMI] vid           support enDe          nDecType[0x3]
[MMI] vid su

[98 chipnDecType[0x5]
MMI] vid support enDecTysmc 1 ok
[MMI] vid support enDecType[0x7]MID_YouTube_ProcTask: line = 1577

MID_YouTube_ProcTask: line = 1581

nvramSettingParamGet:u16MsgLanguage = 32773,line = 1512


file=../../apps/sen5_ui/src/normal/asc_normal.c,func=normalInitialize,line=2090

LG saved
Registrado:
31/07/2013
Gracias:
75/253
Mensajes
736
Prueba con el que se te quedó colgado

QVIART DUAL : SATELITE 4K ANDROID 9.0 DVB-S2X+DVB-T2+DVB-C+IPTV

 



PadreDeFamilia
!! ADVERTENCIAS !!: Las informaciones aquí publicadas NO CONTIENEN KEYS para la decodificación de ningún sistema: NO SON OPERATIVOS en sistemas SAT que precisen de su correspondiente suscripción. ESTA TOTALMENTE PROHIBIDO EL USO DE ESTAS INFORMACIONES PARA LA MODIFICACIÓN O DEFRAUDACIÓN DE SISTEMAS DE ACCESO CONDICIONAL. EN ESTOS FOROS NO SE PERMITE LA PUBLICACIÓN DE INFORMACIONES ILEGALES POR PARTE DE LOS USUARIOS. EN CASO DE DETECTARSE ESTE TIPO DE INFORMACIONES, LOS USUARIOS SERÁN EXCLUIDOS DE ESTAS PÁGINAS.
PROHIBIDA LA PUBLICACIÓN DE ENLACES A FIRMWARES ILEGALES
LOS FOROS NO SON MONITORIZADOS DE MANERA CONSTANTE, CUALQUIER INFORMACIÓN QUE PUEDAS CONSIDERAR ILEGAL REPORTALA A LA ADMINISTACIÓN DEL FORO