PKT GM990 Enigma2 Nibiru V3 ImageEnigma2 OpenSource Project SH4 Duckbox GIT-1997 PKT-841 mod SVN Nibiru V3 Image
Image is designed for installation in a flash
Support Receiver: Golden CR Media 990 HD
Added by PKT:
- PTS Blue Panel
- EMU POINT Manager v1.0.2
- PKT Mount Manager v0.7.4
- PTS Info Center
- POINT Skin Setup
- PTS Key Mapper v1.2
- POINT Install Manager v1.0.2
- PTS Disk Manager
- Media Center PTS
- PTS Control Channel
- POINT Spinner Selector
- GraphMultiEPG mod PKT
- DD Subtitle
- DM Supply v1.3.19
- Dream Explorer v6.9
- My Tube Player
- VidBrowser v1.0
- Shoutcast
- Simple Bitrate
- WebcamViewer
- CrossEPG v0.6.1
- Basic POINT HD skin
- POINT F1 HD skin
- HD pts Gold Skin
- POINT HD Silver Skin
- POINT HD skin Allien
- POINT HD Black Glass skin
- PTS Picons
- add support HighSR
- add RT3070 rt2870 & WIFI drivers & Setup
- add FTDI PL2303 & Support
- add SWAP support
- add NFS / CIFS / NTFS support
- add recording Timeshift & Patch
- Remote control tuning:
Folder - Media Center
Page Up / Down - Cahnnel Up / Down
Tms - Timeshift
TTX - Teletext
FAV - Feed Panel
Green - Audio Select
Yellow - Video select
Blue - Blue Panel
And many others ...
FTP username: user: root, passwd: pkteam
Podziękowaia Golden Interstar for the company for hardware support.
Regards Koders Polish TeamWARNING! NOT LIABLE FOR THE USE OF THIS SOFTWARE IN VIOLATION OF LAW, THAT REMEMBER WATCHING PAY TELEVISION SUBSCRIPTION unpaid is a crime and are punishable by imprisonment up to 3 years!
Download PKT_GM990_Enigma2_Nibiru_V3_Image.zipIntroduction1. Prepare a USB stick with 1 partition in FAT32
2. Set the default system boot for [enigma2]
3. Create a directory on the pendrive enigma2
4. Copy the uImage and e2jffs2.img a previously created directory enigma2
Upload Image Enigma2:
1. Turn off receiver
2. Connect the USB stick ready to receiver
2. On Frontpanelu hold [OK] and then turn the power switch
3. After about 5 seconds, the display should appear in the display [FORCE] then you should release the [OK] and press [V +]
4. If everything was done correctly the display flashes [U LD] which means that the image is loaded.
5. After finishing the upload operation should be released shows [Succ], and the receiver will reboot automatically