SW-update by USB - Vantage SW for iLLUSIONmax2HD receiver

VG-k*y for vias@t E5 (cca. 17 ch)

http://data.hu/get/1278706/KeyData_13-03-2009.key.html

try click orange box instead of green

sorry it's a Hungarian filesharing website - a look other English site on the future

orange box = free download
green box = premium

The Hungarian language is very difficult for other nations.

SW_02.47.01 M02x.ANY-X300_panelCW(tecatel)
This SW for iLLUSIONmax2HD ->Vantage SW for max2 STB

SW_02.34.01 M01x.ITS-X300_panelCW(tecatel)
This SW is return from vantage to max2 (Multicam2.34)

Note : The iLLUSIONmax2HD (and other clone STB)  is use ANY-X300 SW
     The VantageHD is use ITS-X300 SW
          The panel name is urgent. It means type of STB (tecatel = iLLUSIONmax2HD)
The main different Vantage and clones is the 2nd byte : 01 or 02
M01 means ITS-X300 -> Vantage boot-sector
M02 means ANY-X300 -> Vantage-clone boot-sector.

If your receiver (max2)  running with original SW - tecatel, 2.34multicam, etc.- ; you need use ANY-X300, because the boot-sector on your STB is M02 (Vantage-clone). The panel is tecatel, if your STB is iLLUSIONmax2HD.

If your receiver running with Vantage SW you need use ITS-X300, because the boot-sector on your STB is M01 (Vantage) The panel is tecatel, if your STB is iLLUSIONmax2HD

If your receiver running with other clone SW - not Vantage- ; you need use ANY-X300, because the boot-sector on your STB is M02 (Vantage-clone). The panel is tecatel, if your STB is iLLUSIONmax2HD.

Select >> Firmware (*.HDP)<<
Select >>01 or 02 << (or >> ITS-300 / ANY-X300 << its same)
Select panel (type of receiver (tecatel=max2)
Select file
>> HPD file write <<

Copy created SW.hdp files to pendrive and GOOOOO.

Stubyte







 

   
another question: by fabor because loading a SoftCam (KM). 64KB key to Vantage (KM) Edison_He @ d_Starsat_Jepssen_Echosat_NanoXX_Octago n-HD & Clone_DreamTV_Dish Network_DigiTV_Seca all_FreeX_XDream_French Lover_06.04.2009.rar, or other
channels are not even when the codes? not seen when it comes to biss channels fcw or because sera.
saludos campeon

Let's write the 16 byte-s DCW into the new Viaccess code. If you finished, the new DWC-code is  in BISS-menü not Viaccess.

Note: VPID is a must for the DCW (16)
 

alguien puede traducir esto al castellano, porque aqui parece que está la clave de como se usan estas flores en nuestro deco.

Entonces, vamos por partes, segun eso, en lugar de ponerlo en viacces, como querian al principio han terminado de ponerlo en el menú de biss y que el valor de VPID es necesario, Ok
 Pero en mi deco, con el sofcam de vantage, en la seccion de biss, no vine ninguno con 16 bytes y ademas tampoco te deja crearlo, solo admite 8 bytes.
 Si le meto un sofcam que puso elgeneral de yumutu, ese si viene incorparados en la seccion de biss, ademas de las filas de 8 byte, filas con 16 bytes , pero de momento con los canales que he probado no florecen ,. Bueno será cuestion de seguir probando cosas.

saludos.

pues yo hoy he probado del satelite 13º E  en cw  las de RTVI eurpe,  RTVI ME y otro más y Ok


saludos.