E2 Image for AzBox HD Elite & Premium

Herramienta para Restaurar al Firm Original

Download file BACK TO ORIGINAL FW.rar , attached to this post.
First DELETE 2 pictures from the MMP directory !!! and than transfer this files !!!
Put file update in the /tmp directory and give CHMOD 755 .
Also , put the file backup_kernel in /MMP directory .

Connect to telnet, and run this command :
./update /MMP/backup_kernel

NOTE: Also You can put this files on usb and run them from it !!!
After, that flash AzBox with original fw, that is all.

http://rapidshare.com/files/406572263/BACK_TO_ORIGINAL_FW.rar

@Guanchedos mas de un año esperando por eso y te preokupa las caracteristikas

te noto con dudas de si es verdad

hay en la seccion un video de youtube de mower

pues ese es este con otro nombre pero es el mismo y mas mejorado k el del video k era alfa total

enhorabuena a los azbox por fin se les ve color

Gracias comadreja 

Para los que al flasear e2 en Azbox cuando se para la instalación en el 58% y ahora tienes el mensaje BOOTING en el display

Solucion elavorada por telesat en inglés:

You will need :

- Application Acronis True Image

- E2Backup.tib

- External HDD case with IDE controller ( or if You are working on PC, Motherboard which have IDE controller ) .

Take the DOM from AzBox and connect it with IDE connector from Your external usb case for HDD .

Connect the red wire from power cable ( 4-pin Molex connector ) from case ( +5V ) ( picture: Molex and pwrcom ) with right oriented pin on connector which is on DOM - pictures DOM1 and DOM2

Connect USB cable from the HDD case with Your PC.

Now, startup Acronis True Image application, and choose Recovery from the menu on right side - picture 1

Choose Disk Recovery on the top of the window and load file E2Backup.tib and press next - picture 2

Choose Recover whole disk and partition and press next - picture 3

Check-all whole Disk, so it means two partitions : Ex** and Linux Swap and press next - picture 4

Choose on which disk You will restore content, in our case DOM, and press next - picture 5

Commit with OK - picture 6

Choose Proceed - picture 7

Wait for few minutes that process complete - picture 8

When the restore of data and partitions finish, press Ok - picture 9

now You can exit from application, 'Safely' eject Your external USB HDD, in our case DOM.

Disconnect usb cable, and put back the DOM on AzBox, turn on AzBox and wait for 20 seconds that E2 boot.

Now you can take a look on enigma, and when You decide to go back on Official version of Firmware, that You can do with plugin from DDdamir.

Installation od DDamir plugin is described in another tutorial.

Download Recovery