mbox configuracion

mbox.cfg

A: { 0 } // for QBoxHD receivers or for any receivers if needed it
//A: { x }
//Choose adapter path
//x=0 -> /dev/dvb/adapter0/
//x=1 -> /dev/dvb/adapter1/
//x=2 -> /dev/dvb/adapter2/
//x=.. -> .......
//default x=0

D: { 0 }

//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//default disabled

B: { 0 }

//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disabled


Z: { 13 } { 192.168.2.100 8400 }

// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default



#C: { 127.0.0.1 7999 }

// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default


U: { 1 }

// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled



L: { 1 }

// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1


T: { /tmp/ }


// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
// default 0 ===> folder path where mbox.xxx file is !!!!


K: { /EMU/OpenXCAS/MboxCAS/ }

// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
// default 0 ===> folder path where mbox.xxx file is !!!!


E: { 1 }

// E option -> disable same cards from peers
// E: { x }
// x=0 -> use same cards(boxids) from peers
// x=1 -> don't use same cards(boxids) from peers
// default 1


M: { 1 }

// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0


P: { /tmp/pmt.tmp }


// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for resivers and images that create this file <- use this if you can
// P: { /tmp/pmt1.tmp }
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2

W: { 0 }

// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled

Q: { 300 }

F: { 500 }

//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB


//card type ,device , clock, inverse Reset
#V: { 5 1 2 0 }
#V: { 3 1 3571200 1 }
// card type:
// Seca 3 , Irdeto 4, Conax 5, Cryptoworks 6, Viaccess 7, NDS 8, Nagravision 9

// device:
// COM1/ttyS0 1 (Linux/Windows)
// COM2/ttyS1 2 (Linux/Windows)
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10


//clocks for COM ports in Hz
//for SCI slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz

//Inverse Reset
// 1 -yes
// 0 -no

J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled


R: { 3600 }
// R option -> resend hello to all peers after X seconds, ony for gboxx peers,not mbox peers
//default in code 3600 seconds



H: { 0 1 1 1 }
// H option -> mapping provid (0-disabled, 1-enabled)
//H: { a b c d }
//a-> mapping all 0BXX to 0B00
//b-> mapping 1810 to 1801
//c-> mapping 1803 to 1801
//d-> mapping 1802 to 1801

and cwshare

#M: { 192.168.10.43 { FB12CAB2 }}
#D: { 192.168.10.17 { 2510 2500 { F1ABC233 { A3 A3 }}}}
I: { 02 }
X: { 05 }
O: { 2000 2000 }
N: { 200 200 }
#M: { server.no-ip.info { AAAAAFAF }}

#G: { cliente.dyndns.org { 24000 24000 { AAAAFFFF { A3 A3 }}}}


C: { XXX.XXX.XXX.XXX 1975 XX XX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 0100006a:0100006B;}
C: { XXX.XXX.XXX.XXX 13257 XX XX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1702FFFF:17020000 }
C: { XXX.XXX.XXX.XXX 13258 XX XX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 1833FFFF:18330000 }