Autor Tema: How use uploader tool (Leído 2052 veces)

Perfil · Registrado: 17/01/2008 Gracias: 144/3190 Mensajes 20498

1. Open the Prismcube Box and activate the 2 pins near USB Port from Wifi adapter
2. Put emergency image on a fat32 formated USB Stick and put in Prismcube Box
3. Put Seriel Cable from PC to Prismcube Receiver
3. Open Prismcube Loader
4. push the file uldr.bin.uartboot_img into the field UART in Prismcube Loader and select UART FIRMWARE
5. push the file u-boot.bin into the field UBOOT in Prismcube Loader and select UBOOT FIRMWARE
6. Now press Start and plug power cable into the prismcube receiver
7. Now the Loader begining to upload, after upload is finished you see on Display UPDATE
8. when you see Remove USB ond Display put Stick out and wait to Boot
9. when the box starts, you can remove the pin and close the Prismcube Box
10. now you can flash wich image you want

uldr.bin.zip, u-boot.zip, PrismcubeUploder.zip adjuntado en el post

emergency-update-20131008.tar.gz http://rg.to/file/5aaf75856c1b7e68ec381b18b3faa4a9/emergency-update-20131008.tar.gz.html