Nos obligan a molestarte con la obviedad de que este sitio usa cookies OK | Más información
receptor viark

Chincheta Autor Tema: rqcs v1.05  (Leído 1599 veces)

12/02/2009, 06:17

Desconectado elgeneral

  • El del VietNan
  • Administrador Global
  • ****
  • Gracias
  • -Dada: 120
  • -Recibida: 1864
  • Mensajes: 20905
messageicon

rqcs v1.05

« en: 12/02/2009, 06:17 »
rqcs v1.05   


 2009-02-11 v1.05
       - Added support for ROM142. Several NA and European providers use this N3 card. Here in
         NA it is used by GlobeCast, and in Europe, Euskatel and TV Cabo.
       
       - Added support for ROM180. Several European providers such as Digital+ (Spain) use this
         N3 card.
       
       - rqcs now supports 4 methods of session negotiation    :D    T08, DT06 Key 0D Expansion,
         Plain CAM N, and Secondary Key methods. Please read carefully rqcs.conf as I have given a
         detailed description of how they may be used and also the pieces of data that are needed
         for each one of them to work. This is to add flexibility.
       
       - Another batch of small bug fixes and improvements.



given the importance of the new session negotiation parameters supported in rqcs, i'm quoting that section in rqcs.conf here in the thread



# ----------------------------- Session Negotiation ---------------------------
# Following is a set of 4 parameters that may be used to achieve successful
# session key negotiation with the card.
# ---------------------------------------------------------------------------
--

# DT08 session negotiation method. Just the Box Key is required for this
# method to work. This is the simpler, preferable method, however, not all cards
# have DT08's.
box_key=8CA6A88CFDE2E263

# DT06 Key 0D session negotiation. An alternative method for when the card does
# not have a DT08. Useful when you have the card's DT06 and not the IRD's
# Secondary Key.
#
# If this value is specified, the DT06 method will be attempted instead
# of the DT08 one.
#
# IMPORTANT: BOTH the Box Key and the DT06 are needed for this method to work.
#
# HINT: The DT06 Key 0D *does not* change when a card is swapped, if you
# have this for an old card that was married to an IRD, it will work for
# newer cards on that same IRD.
dt06_key_0d=

# Plain CAM N negotiation method. Another alternative method for when the card
# does not have a DT08. It is somewhat equivalent to the DT06 Key 0D method and
# again, useful when you have the card's CAM N obtained from an expanded
# DT06 Key 0D. As a sidenote, this parameter is equivalent to newcs's
# <rsa></rsa> parameter.
#
# IMPORTANT: BOTH the Box Key and CAM N are needed for this method to work.
cam_n=

# Secondary key session negotiation method. If your card does not have a DT08,
# and you can't extract the cam's N key or DT06 Key 0D, this is the only possible
# method. The secondary key must be extracted from a provider IRD's TSOP dump.
#
# If this value is specified, it will supercede the DT08, DT06 Key 0D and Plain
# CAM N session negotiation methods. Neither the Box Key, DT06 Key 0D nor CAM N
# parameters are needed for this method to work, and will be ignored if they
# are provided.
#
# The secondary key is 96 bytes long and has the following structure:
#
# II II II II XX XX XX XX XX XX XX XX XX XX Y1 Y1 Y1 Y1 Y1 Y1 Y1 Y1
# SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK
# SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK
# SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK
# SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK
# Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 CS CS
#
# II = IRD serial number.
# XX = Unimportant.
# Y1, Y2 = SK signature and also used to calculate the box key.
# SK = Actual secondary key data (CAM N, public modulus).
# CS = Checksum.
#
# NOTE: The Secondary Key should be specified as a single line without spaces
# (like the Box Key), and should be the exact 96 bytes as extracted from the IRD.
#
# NOTE: You can copy the 64 bytes that are labeled 'SK' from the Secondary
# Key, and use them in the cam_n parameter. This will also work, in that case
# the Box Key parameter must also be provided.
secondary_key=

# Optional. Card provider's IRD RSA key (only relevant for DT08 session
# negotiation method.
rsa_key=


No tienes permiso para ver los enlaces. Regístrate o Autentícate


 

GoogleTagged



Related Topics

  Asunto / Iniciado por Respuestas Último mensaje
normal_post *
rqcs-1.02

Iniciado por elgeneral Rqcamd

1 Respuestas
2037 Vistas
Último mensaje 11/01/2009, 14:31
por elgeneral
normal_post *
rqcs 1.06

Iniciado por satfool Rqcamd

2 Respuestas
1375 Vistas
Último mensaje 06/02/2009, 11:26
por elgeneral
normal_post *
rqcs-1.06

Iniciado por elgeneral Rqcamd

0 Respuestas
930 Vistas
Último mensaje 22/02/2009, 13:44
por elgeneral
normal_post * 0 Respuestas
4951 Vistas
Último mensaje 26/12/2009, 08:39
por elgeneral
normal_post *
rqcs 1.09

Iniciado por redonn Rqcamd

1 Respuestas
1641 Vistas
Último mensaje 02/08/2010, 02:18
por spalermo_9



PadreDeFamilia
!! ADVERTENCIAS !!: Las informaciones aquí publicadas NO CONTIENEN KEYS para la decodificación de ningún sistema: NO SON OPERATIVOS en sistemas SAT que precisen de su correspondiente suscripción. ESTA TOTALMENTE PROHIBIDO EL USO DE ESTAS INFORMACIONES PARA LA MODIFICACIÓN O DEFRAUDACIÓN DE SISTEMAS DE ACCESO CONDICIONAL. ESTOS FOROS SON MODERADOS Y NO SE PERMITE LA PUBLICACIÓN DE INFORMACIONES ILEGALES POR PARTE DE LOS USUARIOS. EN CASO DE DETECTARSE ESTE TIPO DE INFORMACIONES, LOS USUARIOS SERÁN EXCLUIDOS DE ESTAS PÁGINAS.
PROHIBIDA LA PUBLICACIÓN DE ENLACES A FIRMWARES ILEGALES