PadreDeFamilia

QVIART DUAL : SATELITE 4K ANDROID 9.0 DVB-S2X+DVB-T2+DVB-C+IPTV

Chincheta Autor Tema: Web Interface 0.80php by joseba and koivo (Simplified)  (Leído 3210 veces)

Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
Web Interface 0.80php by joseba and koivo (Simplified)

21.01.10


Webinterface 0.80php by joseba und koivo (vereinfacht)
Hallo Leute, ich habe hier das genannte Webinterface vereinfacht. Viele Leute bekommen es mit dem Telnet oder dem CHMOD nicht so richtig hin bzw. mit dem reinladen der Daten in das /MMP Verzeichniss. Daher habe ich mir gedacht, ich werde dies mal in eine .plugin-Datei machen. Da ich aber grad keine Zeit mehr habe, hat es für den letzten Schritt leider noch nicht gereicht. Ihr müsst allerdings die angehängte Datei nur Extrahieren und dann den Ordner webinterface nach Plugins kopieren. Danach könnt ihr es auf der Azbox unter Plugins starten. Durch eine einfache Eingabe der IP-Adresse im Webbrowser des PCs könnt ihr dann zugreiffen. Bei mir wird die IP-Adresse in jeder Config-Datei sogar automatisch angepasst. Bleibt eigentlich nur noch anzupassen, ob ihr USB1 oder USB2 oder interen HDD für die Filme verwendet Mit Start der AzBox wird das Webinterface übrigens automatisch gestartet.

Ich möchte mich bei koivo und joseba entschuldigen, dass ich sie darüber noch nicht informiert habe. Der Script an sich ist jedoch gleich geblieben. Die Daten werden auch von /MMP gestartet. Ich habe lediglich das automatische Einrichten des Scriptes erledigt um unerfahrene User das Telnet und das FTP zu ersparen (derzeit kann das FTP noch nicht gespart werden, da es keine .plugin-Datei ist und noch nicht vom Stick oder dem Internet installiert werden kann).

Was werde ich zukünftig zum Laufen bekommen wollen (nur nach Zustimmung der Beiden):

- Installation von /tmp oder dem USB-Stick (in den kommenden Tagen; wenn ich Linux auf meinem PC habe)
- Ein Webradio im Interface, der die Webradios aus der station.xml vom Webradio-Plugin lädt
- Samba-Plugin integrieren, um Zugriff auf Movies und andere Ordner zu gewährleisten
- Automatischer Samba-Start der Box + Verknüpfung zum Öffnen mit dem Browser

Falls ihr Fehler entdeckt bzw. Wünsche/Anregungen habt, kontaktiert mich.

Edit: Nachdem Joseba sich mal bedankt hat, sollte des glaub keine Probleme mehr gegeben Spart ihm zumindest Arbeit (hoffe ich). Mir ist aufgefallen, dass /MMP bei einem FW-Update geleert wird. Da das "Setup" von mir dann aber im PLUGIN-Ordner bleibt, muss man dies nicht neu installieren. Ich habe jetzt gerade noch am Samba gearbeitet, da ich dies sowieso schon mal Testweise (ohne Webinterface) am Laufen hatte. Dieses startet automatisch mit. Dazu kopiert das Startscript die Einstellungen und führt dann die Befehle aus. Evtl. versuche ich diese Einstellung zum Ändern in das Webinterface einzutragen (so wie die IP-Sachen, etc.). Allerdings würde hier dann die Einstellung erst nach einem Neustart übernommen. Das mit dem Radio wird ein bissl schwieriger. Hab schon ein Webradio am Laufen, nur nicht an der AzBox. Ich will des so programmieren, dass er dies aus der Station.xml-Datei erkennt und es über dem PC-Player direkt abspielt und nicht von der AzBox gestreamt wird. Streaming macht nur bei LIVE-TV und LIVE-Radio, dass man nicht aus dem Internet bekommt Sinn. Evtl. klappt es sogar die HTTPS_Streams.txt aus "DISK2" zu importieren und dort ein Live-TV von IP-Channels einzurichten. Dazu muss die AzBox dann noch nicht in der lage sein dies zu streamen. Das wird sich ja dann in den kommenden Monaten zeigen. Ich gehe jetzt erst mal mich aus Ohr hauen und evtl. noch kreativere Ideen sammeln Mein bruder kam auf die Idee ein WebFTP zu integrieren und ein WebMail mit den Account-Daten von dem Plugin Mailee. HTML und PHP ist von ihm die Stärke. Ich lerne des zwar schon seit ca. 3 Jahren, aber er hats mit nem vollwertigem CMS-System (Chat, Forum, etc. alles eigen; arbeitet seit ca. 2 Jahren dran) es weiter gebracht als ich. Aber soetwas wie Radio-Streams und TV-Streams (wie gesagt nur von Internetprogrammen, damit es nicht zu missverständnissen kommt), sollte schon möglich sein. WebFTP und WebMail wird sich dann mein Bruder mal genauer anschauen. Lediglich im Design für Webseiten machen soll ich besser sein, aber das was joseba und koivo da schon gemacht haben ist ziemlich schick (finde ich)
Gracias a DEDEX7200Pro

I want to apologize to koivo joseba and that I have not been informed about it. The script itself has remained the same. The data can also be started from / SMP. I've only done the automatic setting of the script for inexperienced users to Telnet and FTP to spare (currently FTP can not be saved because it does not. Plugin file, and not from the stick or the Internet can be installed).

What will I get in the future want to run (only after approval of the two):

- Install / tmp or the USB stick (in the coming days, if I have Linux on my PC)
- A Station in the interface, the Web radio from the web radio plugin loads station.xml
- Samba integrate plug-in, to ensure access to movies and other folders
- Automatic startup of the Samba box + shortcut to open the browser

If you discover errors or wish / have suggestions, contact me.

Edit: After Joseba thanked me, would think of no more problems Saves given him at least work (I hope). I noticed that / SMP for a Firmware update will be emptied. Since the "Setup" is from me but then in the PLUGIN folder, you do not install it again. I'm now still working on Samba, so anyway since I had time testing ways (without web interface) running. This will start automatically. To copy the startup script, the settings and then executes the commands. Possibly. I try to enter this setting to change in the web interface (such as the IP matters, etc.). However, this would be the attitude taken only after a reboot. Related to the radio will be a bissl difficult. Have been running a web radio, just not at the AzBox. I want the program so that it appears from the file Station.xml recognizes and directly through the PC player plays out and will not be streamed from AzBox. Streaming makes only LIVE TV and LIVE Radio that you can not get from the Internet sense. Possibly. It works even HTTPS_Streams.txt from "DISK2 Import and establish there a live TV channels from IP. In addition, the AzBox it must not be able to stream it. Time will tell even then in the coming months. I'm going first time hit me from the ear and possibly even more creative ideas to collect my brother came up with the idea a WebFTP integrate, and with a WebMail account data from the plugin Mailee. HTML and PHP is the strength of it. I learn to put the while been about 3 years ago, but he completed their hats with nem CMS (chat, forum, etc all have; worked for about 2 years off it) more than I do. But something like streaming radio and TV streams (as I said only by Internet programs, so there is no misunderstandings), it should already be possible. WebFTP and WebMail will then look at my brother more times. Only make the design for websites I should be better, but what they have already done since koivo joseba and is pretty smart (I think)

Gracias a DEDEX7200Pro

Download
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
New File by DEDEX7200Pro

24.01.10


In what struck me also as I have rumgebastelt on Samba. Thanks anyway. So now I have fully integrated the WebFTP. I wish you much fun. Folder must be under webinterface / PLUGINS copied. Under toolbox -> Samba startup currently has no function, because I get the Samba server does not start.

What I am going to make yet is that I'm using the command:

<? php
$ ip = file ( ". / configs / ip.conf");

echo "<a href=\"http://".$ip[0]."/testxxx.php\"> Test </ a>";
?>

This reads out the IP of the receiver from the IP.conf. One could then links or places where you can enter the IP needs to be replaced so


Edit: I need time feedback from you. Right now would mitstarten the Samba server. You can type a time in Start -> Run -> \ \ IP-of-box? (ie the IP of course). With me of when I start on the Telnet starts, but it will not be displayed

Download
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
Version 0.80c

- New player for movies
- Only compatible video files under Movies (ie no images, etc.)
- Music player (no video)
- Pictures (pictures only)
- Each path by default set to USB1 and under changeable setting.
- Addition to NAS as a virtual USB device (an empty stick must be plugged in, since otherwise the box rumzickt that no recordable device is available)
- NAS mounted in standard USB1, so also in the Movie Player, etc. available (but you must still adjust it so with you; Webinterfaceeinstellungen -> Nas and a NAS and then reboot the box)
- Fixed a few minor problems (samba auto start on / off, ...)


Gracias a DEDEX7200Pro

QVIART DUAL : SATELITE 4K ANDROID 9.0 DVB-S2X+DVB-T2+DVB-C+IPTV

 



PadreDeFamilia
!! ADVERTENCIAS !!: Las informaciones aquí publicadas NO CONTIENEN KEYS para la decodificación de ningún sistema: NO SON OPERATIVOS en sistemas SAT que precisen de su correspondiente suscripción. ESTA TOTALMENTE PROHIBIDO EL USO DE ESTAS INFORMACIONES PARA LA MODIFICACIÓN O DEFRAUDACIÓN DE SISTEMAS DE ACCESO CONDICIONAL. EN ESTOS FOROS NO SE PERMITE LA PUBLICACIÓN DE INFORMACIONES ILEGALES POR PARTE DE LOS USUARIOS. EN CASO DE DETECTARSE ESTE TIPO DE INFORMACIONES, LOS USUARIOS SERÁN EXCLUIDOS DE ESTAS PÁGINAS.
PROHIBIDA LA PUBLICACIÓN DE ENLACES A FIRMWARES ILEGALES
LOS FOROS NO SON MONITORIZADOS DE MANERA CONSTANTE, CUALQUIER INFORMACIÓN QUE PUEDAS CONSIDERAR ILEGAL REPORTALA A LA ADMINISTACIÓN DEL FORO