PadreDeFamilia

QVIART DUAL : SATELITE 4K ANDROID 9.0 DVB-S2X+DVB-T2+DVB-C+IPTV

Chincheta Autor Tema: BDA Interface For AltDVB  (Leído 25647 veces)

23/06/2010, 21:57 -

BDA Interface For AltDVB

Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
AltDVB v2.2 BDA device

This is a new BDA interface wrapper for AltDVB v2.2.


The configuration file (Dev_Bda2Driver.cfg) should be placed in the same folder
as the interface (Dev_Bda2Driver.int). If this file doesn't exist, the interface driver
will create a new one with default values.

DVB-S2 signalling:
TechnoTrend users - no change neccessary (DVBS2Signalling signalling value is the default 8VSB)
KNC One users - change the DVBS2Signalling signalling value to: 8PSK
Hauppauge users - change the DVBS2Signalling signalling value to: NBC_8PSK
all other - try 8VSB or 8PSK

S/S2 Pilot and S2 Roll Off:
these values are for the Haupppauge drivers and practically should not be changed

v 0.1.0.12 -
- recompiled with latest Technotrend BDA SDK (1.0.1.21). Now use ttBdaDrvApi_Dll.dll

ALT dev_bda2driver_v0.1.0.12.zip
« Última modificación: 04/09/2010, 22:56 por josagi »
24/06/2010, 19:02 -

AltDVB v2.2 BDA device

#1
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
24/06/2010

AltDVB v2.2 BDA device v 0.2.0.1



- Removed DVBS2Signalling, DiSEqC, S_ROLLOFF settings from config.
- Added FEC support.
- LNB power-off support.
- Vendor-specific BDA extension autodetection. Now supported:
* Technotrend BDA API (use ttBdaDrvApi_Dll.dll). ToneBurst + Raw DiSEqC, LNB power-off, Modulation type selection.
* Hauppauge BDA extension. Raw DiSEqC, Modulation type selection, S2 Pilot/RollOff settings.
* Conexant BDA extension. Raw DiSEqC, Modulation type selection, S2 Pilot/RollOff settings (optional), LNB power-off (optional).
* DvbWorld BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection.
* Turbosight BDA extension. Raw DiSEqC, Modulation type selection, LNB power-off.
* Twinhan BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection, LNB power-off.
* TeVii BDA API (TeVii.dll). Raw DiSEqC, LNB power-off, Modulation type selection.
* Omicom BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection.

dev_bda2driver_v0.2.0.1.zip
04/07/2010, 19:00 -

AltDVB v2.2 BDA device

#2
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
AltDVB v2.2 BDA device v.0.2.0.2


- Change BDA type detection order. Use Turbosight, DVBWorld
   extension for TeVii devices with old drivers (pre 2009).
- Show Technotrend product name instead tuner filter name.
- Change credits and added project url in device selection dialog.

P.S. v 0.1.0.12 and later not need any MSVC runtime.
+ Please update topic name (update or remove version).

dev_bda2driver_v0.2.0.2.zip
18/07/2010, 21:57 -

Re: AltDVB v2.2 BDA device

#3
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
AltDVB v2.2 BDA device v.0.2.0.3

This is a new BDA interface wrapper for AltDVB v2.2.

!!! ttBdaDrvApi_Dll.dll, TeVii.dll must be placed in directory with AltDVB.exe !!!

The configuration file (Dev_Bda2Driver.cfg) should be placed in the same folder
as the interface (Dev_Bda2Driver.int). If this file doesn't exist, the interface driver
will create a new one with default values.

S2 Pilot and S2 Roll Off:
these values are for the Haupppauge drivers and practically should not be changed

v 0.2.0.3 - 2010.07.18

- DVB-S tuning code cleanup.

dev_bda2driver_v0.2.0.3.zip
26/07/2010, 18:46 -

Re: AltDVB v2.2 BDA device

#4
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
Date: 25-07-2010
----------
v 0.2.0.4

- Initial DVB-S tuning fixed (power-on, power-off).

dev_bda2driver_v0.2.0.4.zip
02/08/2010, 05:33 -

Re: AltDVB v2.2 BDA device

#5
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
01.08.2010

AltDVB v2.2 BDA device v.0.2.0.5

Código: [Seleccionar]
[B]v 0.2.0.5 - 2010.08.01 [/B]
- Experimental Microsoft Windows7 DiSEqC BDA-extension support. Used in Windows7 Media Center (DiSEqC 1.0), if driver provide this extension.
  Most Win7-designed BDA-drivers provide this extension only for DiSEqC 1.0, but specification support RAW DiseqC 1.x/2.x and ToneBurst.
  Current build support only ToneBurst/DiSEqC 1.0 for this extension (but in sources implemented also RAW DiseqC support).
- New configuration file option BDA_TYPE - preffered BDA-extension (Microsoft or TeVii). BDA extension always autodetected and this option can change priority.
----------


dev_bda2driver_v0.2.0.5.zip
04/09/2010, 22:57 -

Re: BDA Interface For AltDVB

#6
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
v 0.2.0.6 - 2010.09.04 - CrazyCat

- Initial DVB-S tuning again fixed (power-on).

dev_bda2driver_v0.2.0.6.zip

03/10/2010, 12:46 -

Re: BDA Interface For AltDVB

#7
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
Date: 03-10-2010
----------
v 0.2.0.7


- Initial DVB-S tuning speed-up.


dev_bda2driver_v0.2.0.7.zip
09/10/2010, 14:46 -

Re: BDA Interface For AltDVB

#8
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
v 0.2.0.8
2010.10.09

- Revert 0.2.0.7 changes (LNB power-on failed for some devices).
- Omicom S2 DiSEqC 1.x minor fix (enable continous 22Khz (50ms) before DiSEqC command).
- Turbosight QBOX, QBOX2, QBOX-S2 and Prof 1100 support (DiSEqC 1.x, LNB power control).


dev_bda2driver_v0.2.0.8.zip
01/02/2011, 19:04 -

Re: BDA Interface For AltDVB

#9
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
Date: 30-01-2011
----------
v 0.2.0.9


- Turbosight QBOXs (and ODM like Prof 1100, MatchBox Pro) support fixed (DiSEqC 1.x, LNB power control)


  down1  dev_bda2driver_v0.2.0.9.zip
30/05/2011, 14:42 -

Re: BDA Interface For AltDVB

#10
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
2011.05.29

v 0.2.0.10 -



- Continous 22Khz tone control, when LOF Switch=0.
For example: LOF Low=5150, LOF Switch=0, LOF High=0 - 22Khz tone off, LOF=5150
LOF Low=0, LOF Switch=0, LOF High=10750 - 22Khz tone on, LOF=10750
- Turbosight 6925 V2 support (DiSEqC 1.x control).
- Turbosight QBOXs support fixed again (DiSEqC 1.x control).


  dev_bda2driver_v0.2.0.10.zip

22/06/2011, 20:14 -

Re: BDA Interface For AltDVB

#11
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
Date: 21-06-2011 - CrazyCat
----------
v 0.2.0.11


- Device configuration dialog implemented.
----------

MSVC2008SP1 runtime required (MSVCRT and MFC)



    dev_bda2driver_v0.2.0.11.zip
25/07/2011, 23:29 -

Re: BDA Interface For AltDVB

#12
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
25-07-2011 - CrazyCat
----------

v 0.2.0.12

- Fix modulation autodetect.
- 8VSB modulation for satellite devices used as NBC_QPSK
----------

SHA1 Checksum: 7cd60753de50d3813693d517469485a159b4344 c


    dev_bda2driver_v0.2.0.12.zip
04/08/2011, 20:06 -

Re: BDA Interface For AltDVB

#13
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
BDA Interface v0.2.0.13 For AltDVB

New option - Relock after timeout. Useful for motorized dishes or periodical signal drops.



    dev_bda2driver_v0.2.0.13.rar
01/11/2011, 22:54 -

Re: BDA Interface For AltDVB

#14
Registrado:
05/04/2008
Gracias:
1276/1708
Mensajes
23694
01-11-2011 - CrazyCat
----------

v 0.2.0.14

- TBS QBox detection fix. QBox BDA-extension preffered except Prof 7500.



    dev_bda2driver_v0.2.0.14.zip

QVIART DUAL : SATELITE 4K ANDROID 9.0 DVB-S2X+DVB-T2+DVB-C+IPTV

 



PadreDeFamilia
!! ADVERTENCIAS !!: Las informaciones aquí publicadas NO CONTIENEN KEYS para la decodificación de ningún sistema: NO SON OPERATIVOS en sistemas SAT que precisen de su correspondiente suscripción. ESTA TOTALMENTE PROHIBIDO EL USO DE ESTAS INFORMACIONES PARA LA MODIFICACIÓN O DEFRAUDACIÓN DE SISTEMAS DE ACCESO CONDICIONAL. EN ESTOS FOROS NO SE PERMITE LA PUBLICACIÓN DE INFORMACIONES ILEGALES POR PARTE DE LOS USUARIOS. EN CASO DE DETECTARSE ESTE TIPO DE INFORMACIONES, LOS USUARIOS SERÁN EXCLUIDOS DE ESTAS PÁGINAS.
PROHIBIDA LA PUBLICACIÓN DE ENLACES A FIRMWARES ILEGALES
LOS FOROS NO SON MONITORIZADOS DE MANERA CONSTANTE, CUALQUIER INFORMACIÓN QUE PUEDAS CONSIDERAR ILEGAL REPORTALA A LA ADMINISTACIÓN DEL FORO