Autor Tema: Dvbe4Sage with Genpix Tuners & DiSEqC Support (Leído 2375 veces)

Perfil · Registrado: 05/04/2008 Gracias: 1276/1708 Mensajes 23694

Dvbe4Sage with Genpix Tuners & DiSEqC Support

 DVBE4SAGE with Genpix Tuners and DiSEqC Support
                     -----------------------------------------------

This is a unofficial prerelease of the open source software DVBE4SAGE by Michael Pogrebisky  
that has been enhanced to support using the BDA driver for Genpix devices as well as DiSEqC 
(Digital Satellite Equipment Control). Support is also included for motors, including USALS.

Michael has been given the source code for these enhancements and has stated 
interest in merging them into his codebase.  However until he does, SageTV users who wish to use 
the Genpix tuners or DiSEqC for switches or motors are free to try this unofficial prerelease.

Note that in order to use the Genpix tuners you need to install the Genpix BDA/PBDA driver available
at the Genpix Electronics website (http://www.genpix-electronics.com).  You will need at least version
Version 0.1.0.2 (http://www.genpix-electronics.com/GenpixBDA_0_1_0_2.zip).

The first thing you should probably know is that I am not a user of SageTV. So asking me SageTV
setup questions, for example, will get you nowhere.  I have nothing against SageTV, I just prefer 
some non commercial software that I use.  The reason I did this work is that I found DVBE4SAGE to 
be a interesting project (no scannning required!). And I also liked the fact that the author not only 
made it free to the public, but open source as well. Sometimes you just have to not only applaud such 
efforts but help them along. It is a nice product like I stated, but it was not terribly useful in 
North America without DiSEqC and without support for the Genpix tuners (very nice tuners and I recommend
them highly if you live in North America!). 

OK so onto the useful information.  For setting up DVBE4SAGE I recommend this (slightly outdated)
guide (http://diginerve.blogspot.com/2010/04/sagetv-digiguide-xmltv-with-dvb.html). It is
tailored for SkyUK users.  But the process is the same for all users.  In addition to what is
in the guide, there are additions to the dvbe4sage.ini file:

In the [General] category:
NorthAmerica=1

Tells DVBE4SAGE it is in North America (obviously).  The major North American providers, shall we say,
take certain liberties with the DVB specification that DVBE4SAGE needs to know about.

In the [Tuning] category:
UseDiseqc=1

if you are planning on using DiSEqC controlled switches or motors.
More on setting this up later.


Also, use these settings if you are using a Dishpro LNB.  Note that currently
these work only with the Genpix Tuners.

; For DishPro LNB use the following 3 settings
;LNB_SW=20000000
;LNB_LOF1=11250000
;LNB_LOF2=14350000

The rest of the dvbe4sage.ini file is standard.

If you do not use DiSEqC, you are done.  Enjoy!

DiSEqC users will notice a new ini file included with the distribution called diseqc.ini.
This file is used by DVBE4SAGE to define your switch/motor configuration.
There are (hopefully) clear instructions at the top of the file that will allow you
to set this file up properly.

240PreRelease.rar

Asunto / Iniciado por	Respuestas	Último mensaje
ProgDVB DiSEqC Setting Iniciado por josagi Listas canales, chat, otros	0 Respuestas 3096 Vistas	28/12/2008, 20:58 por josagi
Optex lanza un receptor de TDT con disco duro y dos tuners Iniciado por josagi Noticias Tecnologicas	0 Respuestas 2276 Vistas	06/01/2009, 13:55 por josagi
Mvision lanza su propio DiSEqC 4x1 Iniciado por josagi Noticias Tecnologicas	0 Respuestas 1564 Vistas	11/02/2009, 14:30 por josagi
SmartDVB + genpix (alpha version) Iniciado por josagi Plugins	2 Respuestas 3562 Vistas	22/11/2009, 08:48 por josagi
motor diseqc 1.2 Iniciado por tobiaselrey INSTALACIÓN de Motores SAT	5 Respuestas 10566 Vistas	01/01/2011, 16:04 por zeppy
Genpix BDA/PBDA Driver Iniciado por josagi Plugins	0 Respuestas 4835 Vistas	11/09/2010, 14:33 por josagi
DiSEqC 1.2 for SkyStar2 PCI & USB Iniciado por josagi Plugins	0 Respuestas 9642 Vistas	15/02/2011, 23:14 por josagi
Ayuda mi azbox bravoo aparece sin señal en los dos tuners Iniciado por machicator Azbox HD (viejo subforo)	0 Respuestas 4594 Vistas	27/02/2012, 04:29 por machicator
problema con los tuners del bravoo+ Iniciado por full_nachito Azbox HD (viejo subforo)	5 Respuestas 4172 Vistas	23/08/2012, 04:44 por ruwal
AZFREE v4.3 ( ORIGINAL y CLON ) en mozca gz131 no funcionan los tuners Iniciado por cdc_pucho BRAVISSIMO Moozca, Twin y Wif	0 Respuestas 1586 Vistas	15/05/2015, 01:52 por cdc_pucho
Qviat Lunix3 4K - 8 tuners ?! Iniciado por ghita_49 QVIART LUNIX3 4k	1 Respuestas 1421 Vistas	26/04/2020, 08:24 por meca2123
Duda sobre Conmutación DiSEqC Iniciado por Guenov76 VIARK SAT 4K	3 Respuestas 1470 Vistas	19/07/2020, 17:46 por Guenov76
Distancia entre el DISEQC y la parabola Iniciado por habanablu Antenas - Recepcion y Sintonizacion	2 Respuestas 894 Vistas	08/07/2020, 09:22 por habanablu
LG Mobile Support Tool. Iniciado por mvg Ayuda Móviles	5 Respuestas 2170 Vistas	24/02/2022, 12:16 por mvg
tuner B no conecta con el resto de tuners Iniciado por esehomo QVIART LUNIX3 4k	1 Respuestas 747 Vistas	06/04/2022, 09:47 por esehomo

Autor Tema: Dvbe4Sage with Genpix Tuners & DiSEqC Support (Leído 2375 veces)

Dvbe4Sage with Genpix Tuners & DiSEqC Support

Related Topics