PadreDeFamilia

QVIART DUAL : SATELITE 4K ANDROID 9.0 DVB-S2X+DVB-T2+DVB-C+IPTV

Chincheta Autor Tema: Oficial firmware y pacht for Technomate 800HD  (Leído 45693 veces)

Registrado:
10/07/2008
Gracias:
0/72
Mensajes
1505
New firmware for Technomate 800HD

01.06.2010

improved


- 1-after factory reset removed default bouquet
- 2-added function to view mac-address in top title of lan menu
- 3-improve factory reset( below 3 function added )
- if you install none compatible channel list , it will removed automatically
- if you remove default cam(now CCcam2104), it will be installed again
- if you use different satellites.xml, it will be restore default TM satellites.xml
- 4-when you select USALS, you will show "Positioner setup" menu.

http://rapidshare.com/files/394090985/TM800_update.bin.html

[archivo adjunto borrado por el administrador]
« Última modificación: 26/12/2010, 08:22 por elgeneral »
02/06/2010, 22:51 -

Re: New firmware for Technomate 800HD

#1
Registrado:
10/07/2008
Gracias:
0/72
Mensajes
1505
Firmware Technomate 800HD 02.06.2010

What is new:
-Disable LPCM audio
-reset only channel , softcam and skin after factory reset
-split softcams for protect ipkg remove bug ( softcams(bin) + softcams.config(config)

Download:
http://rapidshare.com/files/394577659/TM800_update.bin.html
Registrado:
10/07/2008
Gracias:
0/72
Mensajes
1505
New firmware for Technomate 800HD 05.06.2010

What is new:

1-Zapping time
2-Remote response
3-in some channel there is audio thick
4-AC3
5-warning message ..while waiting to process a function
6-skin compatibility to stop hang-up

Download:http://rapidshare.com/files/395628713/TM800_update.bin.html
29/08/2010, 12:04 -

Re: New firmware for Technomate 800HD

#3
Registrado:
10/07/2008
Gracias:
0/72
Mensajes
1505
TM-800 TEST Image 28-8-10

-Unzip this files
-This is test image is not final
-please  DO FACTORY RESET AFTER DOWNLOADING BY USB OR MINI WEB OR ANY DCC /FTP Etc,

1.Improve VFD
1.1-added VFD micom version ("Front processor ver:") in About ( old micom is "1.0.0", lastest micom is "1.0.1" )
1.2-added resolution icon in VFD ( 480p, 576p/i, 720p, 1080i/p)
1.3-added mute, power, REC, SAT, Tu1, TER, TV and Radio icon in VFD
Note) VFD Icons not ready yet : FILE / TIMESHIFT / TIMER / HD / USB / Lock / Dolby / MP3 / REC (in File Play)
1.4 fixed time bug when standby
1.5 added character font table in VFD ( some channel name was not shown in VFD)
1.6 added 밇XT. signal� message in VFD when vcr mode select
1.7 improve deep standby ( when standby mode, only navigation LED display)
1.8 improve standby
2. added TV/AV function
3. added VCR function
4. enable timer menu ( but recoding function is not stable )
5. improve rgb, cvbs, ypbpr hardware level
6. fixed wrong Video format and Video size in Service info menu(info -> info)
7. fixed bug to work volume and mute in RCU when standby
8. fixed aspect ratio bug when source stream is 4:3
9. added 밃utomatic� function in Aspect Ratio, when scart mode
10. added resolution mode (480i / 576i)
11. fixed radio background bug
12. fixed broken image when TV and radio switch
13. fixed wizard message bugs when first start.
14. fixed mute image bug when resolution change
15. improve hang-up issue (Positioner setup)
16. fixed RCU button functioning bug (TV/RADIO , TV/AV)

Download TM-800 TEST Image 28-8-10
09/12/2010, 13:00 -

Re: New firmware for Technomate 800HD

#4
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
DW TM800HD 09/12/10

UR fixes


Hd -record one watch another
1-ac3 and stereo fixed between adverts.
2-increase in flash memory extra 6 MB
3-CPU speed increased by 20 % to 400mhz
4-CPU has been re programed to increase efficiency now running at 95%.
5-default channel list option
6-recording play back has been enhanced
7-Signal sensitivity has been increased
8-scanning blocks fixed
9-Default audio ac3
10-Added audio lip sync function to plugin menu, also auto lip sync fixed and manually adjustable for channel or full satellite.
11-Audio selection function improved
12-factory reset and update will not delete c: Line, history or configurations
13-full card reader fixed for all cards
14-oscam scam latest cams fixed
15-speed of menus enhanced now running very fast
16-USB auto mount fixed
17-scramble audio track speed change improved
18-AV noise improved in channel change
19-Factory reset speed improved .
20-improvements in speed of channel change and osd menus.

DW modifications

Rytek Auto EPG updater installed
Rat's boquets installed (Sky UK 28.2E)
Cool TV EPG installed
EPG search facility installed
EPG to timer facility installed
New digitalworldz boot screen
Spinning cogs replaced with scanner
Digidude download Ppanel
Jimux Ppanel toolkit installed
Rats channel list updater
CCcam switch installed
Improved CCcam Ppanel
CCcam.cfg reduced to only needed lines
CCcam info installed
Jimux audio player (wav files only)*

*make a directory on your hard disk to store '.wav' files.
Any directory name will do as it searches /media/ for '.wav's.
Then just load a few 'wav's, run the option to 'Find Audio Files'
(yellow button, 'ppanels', 'Music Jukebox' and you are ready to go.

Thanks to everyone involved in making these modifications possible.

Fixed green screen issue when pressing yellow button after changing skin

NEW!! quick button shortcuts

red button download softcam keys
red long press launch CCcam switch
green button open Cool EPG
green long press search EPG
yellow button Ppanels
blue button EMU / DL panel
blue long press launch CCcam info



Image resolution set to 1080i @ 50Hz
Tuner set to fixed single feed @ 28.2E

DO NOT FLASH THIS IMAGE TO A RECEIVER THAT HAS NOT BEEN JTAGGED BY TECHNOMATE.
YOU RISK DAMAGING YOUR RECEIVER BEYOND REPAIR, AND MAY VOID THE WARRANTY!!

UR image modified & uploaded by digidude

Download
13/12/2010, 13:26 -

Re: New firmware for Technomate 800HD

#5
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498

13-12-2010

For Jtagged Receivers only


1- HD: record one and watch another on same TP
2- AC3 and stereo fixed between ads
3- Increased flash memory by an extra 6MB
4- CPU speed increased by 20% to 400MHz
5- CPU has been re-programmed to increase efficiency. Now running at 95% efficiency.
6- Default channel list
7- Recording and playback has been enhanced
8- Signal sensitivity has been increased
9- Scanning blocks fixed
11- Default audio AC3
12- Added audio lipsync menu, auto lipsync fixed and can manually adjust lipsync on a channel or a full satellite
13- Audio selection function improved
14- Factory reset and update will not delete c:Line history as well as configurations
15- Full card reader fixed for all cards
16- Oscam and scam latest cams fixed
17- Speed of menus enhanced
18- USB auto mount fixed
19- Scrambled audio track speed change improved
20- AV noise improved in channel change
21- Factory reset speed improved by 80%
22- Improvements in channel change speed and OSD menus
22- Sata hard disk detection fixed
23- Audio change click
24- High bitrate HD channels
25- Info button 2x displays further info

Download
15/12/2010, 08:39 -

Re: New firmware for Technomate 800HD

#6
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
Update Image 15-12-2010

warning
when downloading from this site
if you are using USB delete the number before the image
it should be TM800_update.bin
-------------------------------------------------------------------

Fixed in image 15-12-2010

1-Press LAN on the remote press ok wait a bit static ip will be displayed
2-choice of 2 factory reset
3-pp panel passworded
4-59% and 87% bug fixed
5-wifi detection speed improved
6-irdeto 2 card fixed
--------------------
To be fixed soon

1-Some hi bit rate HD channel in play back pixilation
2-Multimedia

Download
   
17/12/2010, 09:49 -

Re: New firmware for Technomate 800HD

#7
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
PLI Image 17-12-2010

Use image 17-12-10 and after

TM-Wifi supports only as bellow and japgs screen shots
1-OPEN
2-WPA
3-WPA-PSK
4-WPA2

 NOT FLASH THIS IMAGE TO A RECEIVER THAT HAS NOT BEEN JTAGGED BY TECHNOMATE. YOU RISK DAMAGING YOUR RECEIVER BEYOND REPAIR, AND MAY VOID THE WARRANTY!!
1-Do not download this s/w if your TM-800 is not modified by Technoamte.
you will get lots of problems .


After downloading to modified TM-800

1-Do factory reset
2-turn off from back for 30 seconds
3-after setting finished go to any satellite and scan few HD channels and sd channels test if all ok

when you are happy the all ok

1-Download your channel list if any problem found the it is the channel list causing it
you have to do fresh scan for all satellites

or via LAN + BLUE button


Download 8_TM800_update.bin
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
DW TM800HD 25/12/10

DW modifications

Rytek Auto EPG updater installed, New auto channel list updater installed
Rat's boquets installed (Sky UK 28.2E 18/12/10)
Cool TV EPG installed New version, 3D look
EPG search facility installed
EPG to timer facility installed
Spinning cogs replaced with scanner
Jimux Ppanel toolkit installed
Rats channel list updater
CCcam switch installed
Improved CCcam Ppanel
CCcam.cfg reduced to only needed lines
CCcam info installed
Jimux audio player (wav files only)*
~ 1Mb more memory free compared to UR release
Numerous other DW customisations

*make a directory on your hard disk to store '.wav' files.
Any directory name will do as it searches /media/ for '.wav's.
Then just load a few 'wav's, run the option to 'Find Audio Files'
(yellow button, 'ppanels', 'Music Jukebox' and you are ready to go.

Thanks to everyone involved in making these modifications possible.

Fixed green screen issue when pressing yellow button after changing skin

NEW!! quick button shortcuts

red button download softcam keys
red long press launch CCcam switch
green button open Cool EPG
green long press search EPG
yellow button Ppanels
blue button EMU / DL panel
blue long press launch CCcam info

Image resolution set to 1080i @ 50Hz
Tuner set to fixed single feed @ 28.2E

DO NOT FLASH THIS IMAGE TO A RECEIVER THAT HAS NOT BEEN JTAGGED BY TECHNOMATE. YOU RISK DAMAGING YOUR RECEIVER BEYOND REPAIR, AND MAY VOID THE WARRANTY!!

This image is based on the UR image of 23/12, so also contains the same fixes and / or bugs. Built from SVN Rev 269. Customised by digidude, partially @ source.

Theres a possibility that trying to factory reset after messing with other things may cause a green screen, but you can reflash via MINIROOT to get back to all the defaults of this backup image

Download
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
TM800-UR-2010-12-28

1. Fixed Audio bugs when resolution change

2. Improve playback but some bugs exist

3. Improve 밨ecording paths� function ( press 밬SB� button in rcu)

3.1 detected usb position ( FRONT /REAR /INSIDE)

3.2 detected Linux and Windows file system

if usb have windows file system, this usb does not select by default Recording paths.

3.3 added format function

Download
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
DW TM800HD 9/1/11

DW modifications


Rytek Auto EPG updater installed
Rat's boquets installed (Sky UK 28.2E 1/1/11)
Cool TV EPG installed New version, SkyHD layout (ish)
EPG search facility installed
EPG to timer facility installed
Spinning cogs replaced with scanner
Jimux Ppanel toolkit installed
Rats channel list updater
CCcam switch installed
Improved CCcam Ppanel
CCcam.cfg reduced to only needed lines
CCcam info installed
Jimux audio player (wav files only)*
Numerous other DW customisations

*make a directory on your hard disk to store '.wav' files.
Any directory name will do as it searches /media/ for '.wav's.
Then just load a few 'wav's, run the option to 'Find Audio Files'
(yellow button, 'ppanels', 'Music Jukebox' and you are ready to go.

Thanks to everyone involved in making these modifications possible.

Fixed green screen issue when pressing yellow button after changing skin

NEW!! quick button shortcuts

red button download softcam keys
red long press launch CCcam switch
green button open Cool EPG
green long press search EPG
yellow button Ppanels
yellow long press import EPG
blue button EMU / DL panel
blue long press launch CCcam info



Image resolution set to 1080i @ 50Hz
Tuner set to fixed single feed @ 28.2E

I have tested, numerous times, switching back and fore between WiFi and ethernet, with no problems. When activating WiFi, allow the confirmation message to count down from 10 to 0 on its own. I also have a small 256Mb USB stick permanently connected to the rear socket, and my HDD has been available during every boot

DO NOT FLASH THIS IMAGE TO A RECEIVER THAT HAS NOT BEEN JTAGGED BY TECHNOMATE. YOU RISK DAMAGING YOUR RECEIVER BEYOND REPAIR, AND MAY VOID THE WARRANTY!!

UR

This image is based on the UR image of 08/01/2011, so also contains the same fixes and / or bugs. Built from SVN Rev 309. Customised by digidude, partially @ source.

Theres a possibility that trying to factory reset after messing with other things may cause a green screen, but you can reflash via MINIROOT to get back to all the defaults of this backup image

CoolTV EPG useage

The layout and some buttons of CoolTV EPG have been changed from default, and listed to enhance use of it within this image. Once your EPG data is populated (either auto or manual via long press of yellow button) you will have a guide layout similar to a sky+HD receiver

a mini screen showing part of the picture, a list of 9 channels at the bottom, and the synopsis of the highlighted programme at the top

Press green button to view the EPG, (or press and hold EPG button and choose coolTV guide), and to browse the EPG you can use the following buttons

2 Page up
8 Page down
4 - 2 hours
6 + 2 hours
< - 24 hours
> + 24 hours
9 View primetime TV (20:00 - 22:00)
0 Return to present time

You can also use the arrows on the remote to step un, down, left and right

Press OK to Zap to the highlighted channel, and exit the EPG

Enjoy peeps

Gracias a [COLOR="Red"]digidude[/COLOR]

Download
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
Beta version no changelod

13-01-11
:_estrellas: :_estrellas:

Download TM800_update_DW_beta.zip
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
TM800_update-UR-2011-02-02

URSR+UR


1-Fixed ftp uploading bug ( problem : when uploading by ftp, files was broken)

2-connax card with cccam in local card reader.

3-when high bitrate scrambled channel recording

4- Improve VMS timer

5-Improve factory-reset ( clear ip information and local cs account information

Download
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
TM-800 HD UR  26-02-2011

fixed
pvr-time shift-trick play
hd skin
some audio problem
Fixed blue screen bugs when go to lan menu after skin change,
------------------------
Warning
To use HD skin there are 2 bugs
1-press USB you will get green screen
2-Recording path which is USB
To overcome that
3-use normal skin do all your setting for hard disk or external USB make sure all works ok
4-Delete normal skin,
Download HD skin all function works ok
2 bugs will be fixed soon

Download 12_TM800_update.bin
Registrado:
17/01/2008
Gracias:
144/3190
Mensajes
20498
TM800 25-2-11 DW-UR Beta

Complete with cool tv guide, epg updater, HD skin support and lots more

based on the UR SVN rev 359

gracias a digidude

Download

QVIART DUAL : SATELITE 4K ANDROID 9.0 DVB-S2X+DVB-T2+DVB-C+IPTV

 



PadreDeFamilia
!! ADVERTENCIAS !!: Las informaciones aquí publicadas NO CONTIENEN KEYS para la decodificación de ningún sistema: NO SON OPERATIVOS en sistemas SAT que precisen de su correspondiente suscripción. ESTA TOTALMENTE PROHIBIDO EL USO DE ESTAS INFORMACIONES PARA LA MODIFICACIÓN O DEFRAUDACIÓN DE SISTEMAS DE ACCESO CONDICIONAL. EN ESTOS FOROS NO SE PERMITE LA PUBLICACIÓN DE INFORMACIONES ILEGALES POR PARTE DE LOS USUARIOS. EN CASO DE DETECTARSE ESTE TIPO DE INFORMACIONES, LOS USUARIOS SERÁN EXCLUIDOS DE ESTAS PÁGINAS.
PROHIBIDA LA PUBLICACIÓN DE ENLACES A FIRMWARES ILEGALES
LOS FOROS NO SON MONITORIZADOS DE MANERA CONSTANTE, CUALQUIER INFORMACIÓN QUE PUEDAS CONSIDERAR ILEGAL REPORTALA A LA ADMINISTACIÓN DEL FORO