Nos obligan a molestarte con la obviedad de que este sitio usa cookies OK | Más información
receptor viark

Chincheta Autor Tema: How To -- Manuales  (Leído 4304 veces)

04/12/2011, 03:18 -

How To -- Manuales

Registrado:
17/01/2008
Gracias:
143/2113
Mensajes
20508
1) How to install Neutrino HD over Official Firmware

 Download Neutrino HD software package which contains patch.bin and neutrino.bin file inside.

 Copy patch.bin fi le to your USB Memory stick (FAT32 formatted)

 Put the USB Stick into AZBox device and start the updating procedure trough Settings menu or by
 turning off and then turning on your AZBox.

 When initial software is installed, your AZBox will displayed IP address. (Note: for Ultra model, you
 have to note the IP address from the Settings menu or from your router, as it doesn’t have display).

 Run Neutrino Loader 1.1 and enter the IP address (which was shown before) int the IP address field of Neutrino Loader 1.1. Press button Upload.

 Once Upload button is pressed, Neutrino Loader will ask you to specify which file you want to be
 loaded. Please, select neutrino.bin file from Neutrino HD package.

 After this flashing procedure starts, please wait until Neutrino Loader confirm you that performing
 operations are finished.

 When you get the confirmation message from Neutrino Loader, please remove the USB memory
 stick from your AZBox.

2) From Neutrino HD back to OFW

 This manual will help You to go back from Neutrino HD to Official Firmware.

 Turn OFF Your AZBox HD device by Power switch on rear panel

 Now turn it ON, and keep pressed VOL+ button on remote control

 After max. 20 seconds IP will be displayed on AZBox HD display

 Start Neutrino Loader

 Unpack archive called Neutrino HD to Official Firmware.zip.

 Enter IP address shown on AZBox HD display in IP address fi eld of Neutrino Loader.

 Press button Upload, after which Neutrino Loader will ask You to specify which file You want to load in AZBox HD.

 Locate file called patch.bin in Neutrino HD to Offi cial Firmware folder, and select it.

 Please wait until process is finished after which Neutrino Loader will display message Kernel installed successfully.

 Turn OFF AZBox HD device, and connect to Your receiver USB Memory stick on which you previously place Offi cial Firmware patch.bin file.

 Turn ON AZBox HD and follow standard Official Firmware UPDATE procedure.

3) From E2 to Neutrino HD

 As with E2, except use the Neutrino Loader instead of AZUp or JAZUp...

 -first install the Neutrino Loader to your PC/laptop, like any other application

 -put AZbox HD into rescue Mode and do as usual with E2, using Neutrino Loader you just installed

4) From Neutrino back to E2 (thanx dvlajkovic!)

 -use Neutrino Loader to put the special patch.bin file to return to OFW
 -theother patch.bin goes to USB stick in order to go from OFW to E2 (this one is from RTi Team)
 -switch off AZbox
 -plug in USB stick
 -turn on AZbox and do the usual upgrade procedure from USB stick, by which you get AZbox HD to give you its IP address on its VFD
 -do the JAZUp/AzUP regular thing to put in E2.

 I still haven't done it - no time, pus dvlajkovic found it to be full of bugs, as I predicted...

 Especially MC is crap, he says and this is what I use at the moment, not having a dish...

 So, gonna sit this one out, I think, keep my nerves intact and wait for them to come to their senses and use Sattommy's MC...
 

Related Topics

  Asunto / Iniciado por Respuestas Último mensaje
normal_post_sticky * 4 Respuestas
12426 Vistas
Último mensaje 14/03/2011, 17:23
por Unamigo
normal_post * 6 Respuestas
10590 Vistas
Último mensaje 02/07/2009, 23:31
por kilouiski
normal_post * 1 Respuestas
10178 Vistas
Último mensaje 29/03/2012, 20:05
por psrobotics
normal_post * 0 Respuestas
4250 Vistas
Último mensaje 01/05/2008, 19:41
por deco
normal_post * 0 Respuestas
3459 Vistas
Último mensaje 02/05/2008, 20:13
por deco
normal_post * 2 Respuestas
17496 Vistas
Último mensaje 22/06/2008, 07:17
por elgeneral
hot_post * 15 Respuestas
12257 Vistas
Último mensaje 14/10/2008, 09:18
por elgeneral
normal_post * 3 Respuestas
583 Vistas
Último mensaje 20/07/2017, 19:28
por dyddyd
hot_post_sticky * 18 Respuestas
4849 Vistas
Último mensaje 06/06/2018, 22:06
por joaquinin
normal_post_locked * 2 Respuestas
354 Vistas
Último mensaje 11/03/2018, 11:14
por IGLE



PadreDeFamilia
!! ADVERTENCIAS !!: Las informaciones aquí publicadas NO CONTIENEN KEYS para la decodificación de ningún sistema: NO SON OPERATIVOS en sistemas SAT que precisen de su correspondiente suscripción. ESTA TOTALMENTE PROHIBIDO EL USO DE ESTAS INFORMACIONES PARA LA MODIFICACIÓN O DEFRAUDACIÓN DE SISTEMAS DE ACCESO CONDICIONAL. ESTOS FOROS SON MODERADOS Y NO SE PERMITE LA PUBLICACIÓN DE INFORMACIONES ILEGALES POR PARTE DE LOS USUARIOS. EN CASO DE DETECTARSE ESTE TIPO DE INFORMACIONES, LOS USUARIOS SERÁN EXCLUIDOS DE ESTAS PÁGINAS.
PROHIBIDA LA PUBLICACIÓN DE ENLACES A FIRMWARES ILEGALES