New image for TGS 210, "2.0.22"

New image for TGS 210, "2.0.22"  

*How to do auto-update with ITGATE Control Center
*** New Control center must be used from now on.(from ver.2.4)
1) Download and Unzip the file below.

http://itgate.co.kr/Rel/2022/TGS210_autowin_rel2022.zip

2) Run the ITGATE Control Center.
3) Insert & save IP address in the 'Config' section.
4) Press 'Update' button & select the *.img file in the 'Update' section.
5) Autoupdate will be started.
6) Wait until the receiver reboots automatically

*How to update TGS 210 by Flashing through serial port
*** New Control center must be used from now on.(from ver.2.4)
1) For Serial update, please click hereunder to download the image.

http://itgate.co.kr/Rel/2022/TGS210_srl_rel2022.zip

1. Connect the receiver & PC with RS 232 cable
2. Power on the receiver & press CH+ button on the front at the same time repeatedly.
3. You will see the menu,in which there is 'Serial Update' & go to the menu using by CH+/- button.
4. When you cursor located on 'Serial update', press vol+ button
& Press CH- button to start the upgrade.
-----------------------------------------------------
Before the above no.4,
1. run the control centre & go to the 'Serial update' section (you don't need to input IP address)
2. After setup the com port, press 'file' & select the img.file.
After that, you can start the serial update under the above no.4

*How to update by Internet
1) Press MENU button on the remote controller and go into " Setup -> Expert Setup -> Software Update -> Internet Update" and select the image.
2) Follow as prompted on the menu..

Improvements are :
- Added 'Miniweb' function
- Added 'Fast channel change' function
- Improved default remote control speed
- Improved Card interface
- Improved Lip-Sync
- Improved Internet connection function in Communication Setup
- Fixed bugs when EPG recording
- Changed 'x2/x8/x16/x32' to 'x2/x4/x8/x16/x32' in FF & RW
- Go back to live channel automatically when playback finished
- Fixed Timer bug
- Added rolling of front LED when working
- Fixed 'mode change' bugs and saving all path
- Changed FEC(Auto) in Satellite Search