Autor Tema: New official image for TGS 210 rel 2.0.17 (Leído 2545 veces)

Perfil · Registrado: 17/01/2008 Gracias: 144/3190 Mensajes 20498

New official image for TGS 210 rel 2.0.17

How to do auto-update with ITGATE Control Center
New Control center must be used from now on.(from ver.2.4)
1) Download and Unzip the file below.
2) Run the ITGATE Control Center.
3) Insert & save IP address in the 'Config' section.
4) Press 'Update' button & select the *.img file in the 'Update' section.
5) Autoupdate will be started.
6) Wait until the receiver reboots automatically

How to update TGS 210 by Flashing through serial port
New Control center must be used from now on.(from ver.2.4)
1) For Serial update, please click to download the image.
1. Connect the receiver & PC with RS 232 cable
2. Power on the receiver & press CH+ button on the front 
    at the same time repeatedly.
3. You will see the menu,in which there is 'Serial Update' 
    & go to the menu using by CH+/- button.
4. When you cursor located on 'Serial update', press vol+ button
    & Press CH- button to start the upgrade.
-----------------------------------------------------
Before the above no.4,
1. run the control centre & go to the 'Serial update' section 
   (you don't need to input IP address)
2. After setup the com port, press 'file' & select the img.file.
After that, you can start the serial update under the above no.4

How to update by Internet
1) Press MENU button on the remote controller and go into " Setup -> Expert 
    Setup -> Software Update -> Internet Update" and select the image.
2) Follow as prompted on the menu..

Improvements are:
- Fixed 'hang up' on zapping channels
- Fixed 'rebooting' on web interface
- Added EPG search menu
- Improved Plugin API
- Improved Teletext
- updated libcrypto.so.0.9.7
- Added 'Retrieve Internet IP' in menu

TGS210_autowin_rel2017.zip

TGS210_srl_rel2017.zip