PadreDeFamilia

VIARK SAT 4K : ES EL DECODIFICADOR DE SATÉLITE ULTRA HD MAS COMPLETO DEL MERCADO, EL MÁS DESTACADO DE LA MEJOR MARCA

Chincheta Autor Tema: Barry Allen for Topfield 7700  (Leído 6834 veces)

13/01/2010, 22:29 -

Barry Allen for Topfield 7700

Registrado:
10/07/2008
Gracias:
0/69
Mensajes
1505
Barry Allen for Topfield 7700

Multipart installer and Barry Allen for Topfield
-------------------------------------------------- -------

Barry Allen (BA) is a tool that allows multiple images on a USB stick or HDD-Box can be operated in parallel. Do as. Tar.gz file available.

The multipart Installer (MPI) is used on the PC to install BA and the images on the box and their management. Is in the database.

Basically, the procedure is as follows:

a) decision, where BA is to be installed. Only on the drive (HDD can be) completely intact, only on the HDD (it does not need a stick inserted in the operation), or stick and HDD

b) then either drive (partition) formatted with ext2 or ext3 and XBA denote a volume label, or a partition of the HDD (more specifically identified below), referred to as the XBA, or both. Can be done with MPI or by hand with telnet

c install) with MPI, the BA to the desired target (stick, HDD, both). Option Installs BA "in MPI. That is the BA partition.

d) with the MPI / the desired images on the BA copy partition. Options Install Images "for stand-alone images (safe option, slow) or" Install Images (1p) for images with the same kernel as in flash (boot faster)

e) with MPI to manage the images


We begin with the invocation of MPI.

IP Address: IP of the Box
Server IP: the IP of the PC
Telnet user: root, Password: your password has been assigned, if any, otherwise left blank
FTP user: root, Password: your password has been assigned, if any, otherwise left blank

Installed Images:
Topfield are installed in the image, there is at least the flash image

UFS_Images:
A copy of the root.tar.gz files of each image.

Installed when installing an image (image-or-Installs Image (1p)) is root.tar.gz copied from the Windows HDD to UFS_Images, then unpacked and appears in the Installed Images ". There it can select (click) and delete to be processed with the right mouse button (the default boot image, etc.).

Flash refers to the image that lies in the internal flash memory and on the internal HDD on / dev/sda1. From the always booted if the USB stick is removed and no other BA image is installed.
In the flash of the Topfield is the kernel, this kernel is used to start the 1p Images.

MPI uses a Signaturfile to control the contained features.
When an image is used, which contains this Signaturfile not be displayed on startup and connect to the Topfield information that could indicate UFS910.

Installation of BA

Step a) as shown above:

BA can be in the pot on each partition to install, not only on a USB stick, but also on the internal HDD, it remains free of the USB port. The BA partition must be formatted in Ext2 or Ext3 and the volume label contains XBA.
Further, it is possible to create on the internal HDD one XBA partition and in addition to a USB stick, plugged in the USB stick is used XBA always preferred.

Step b) as shown above:

To generate the BA partition on a USB stick (easy version for beginners, Attention: Stick is completely erased! Not delete the record!):

Stick to the USB port
Then one of the two variants

Option 1:
USB / HDD View menu at the MPI
Stick Select, Right-click, format ext2 or ext3

Option 2:
with telnet on the box
umount / dev/sdb1
mkfs.ext2 XBA-L-b 4096 / dev/sdb1

To generate the BA partition on the internal HDD (advanced):

Option 1:
with telnet on the box
Use with "tune2fs-L XBA / dev/sda3" as the movie Partinion BA.
Is simple, but the problem has resolved that the movie will be viewable partition soft links and the user may be time to clean up and BA

Option 2:
HDD to expand and connect the PC to shrink with Geparted the movie at 4 GB partition at the end and create an ext2 partition XBA to install HDD into the pot clean again and BA


Step c) as shown above:

After the partition was created BA, BA is now installed there

"Installed choose BA" to complete the BA installation on a USB stick or on the internal HDD.
After installing the BA version, please re-MPI, then the MPI functions should correctly display
Archivos Adjuntos
Tipo de Archivo: zip    AAF-BA-0.65_TF7700.zip (4,52 MB (Megabytes), 0 visitas)

http://rapidshare.com/files/334853916/AAF-BA-0.65_TF7700.zip.html
13/02/2010, 09:44 -

Re: Barry Allen for Topfield 7700

#1
Registrado:
17/01/2008
Gracias:
144/3115
Mensajes
20498
Barry Allen 0.74 for Topfield

Unbedingt vor Update auf Olymia-Image auf die neue Version updaten.

Gracias a Thomas4711

21/02/2010, 21:40 -

Re: Barry Allen for Topfield 7700

#2
Registrado:
17/01/2008
Gracias:
144/3115
Mensajes
20498
Barry Allen 0.75 for Topfield


V0.75 Update und Olympia V2 rcS für 1P Images
so hier der Fix damit es mit Olympia V2 auch mit BA 1P Klappt

Download

Fix für Olympia 1P Images mit BA 0.75

Hier gibt es ein Fix für den Einsatz von MPI in Verbindung mit 1P Images

die angehängte Datei ist nur für Olympia V1 und Olympia V2 Images im Flash !

mit den Fix könnte Ihr wieder nach der Installation mit MPI die Images vom Stick Starten, hab das Standby Problem der HDD nicht und den Geschwindigkeitsvorteil weil der Kernel im Flash liegt.

Es werden nur Olympia Image als 1P Unterstützt !

das File wird nur ins Flash Image Kopiert an folgende stelle

/etc/init.d

Voraussetzung ist auch die Installation vom BA 0.75 auf dem Stick !

Gracias a Babsy

[archivo adjunto borrado por el administrador]
23/02/2010, 21:07 -

Re: Barry Allen for Topfield 7700

#3
Registrado:
05/04/2008
Gracias:
1275/1582
Mensajes
23382
New Barry Allen 0.76 for Topfield 7700

Código: [Seleccionar]
V0.76
- fix 1P Image mount RECORD /media/hdd


Fix for Olympia 1P Images with BA 0.76

Código: [Seleccionar]
There is a fix with 1P for the use of MPI in conjunction Images

The attached file is only for V1 and Olympia Olympia V2 Images in Flash!

with Fix You could return after the installation of MPI, the images from the stick start, have the standby problem, not the HDD and the speed advantage because the kernel is in Flash.

It is supported only Olympic image as 1p!

the file is only in the Flash Image Copies to the following places

/ etc / init.d

Another prerequisite is the installation of BA 0.76 on the stick!

AAF-BA-0.76_TF7700.tar.gz
http://www.ysharing.com/es/file/219/AAF-BA-0-76-TF7700-tar-gz.html

rcS.rar
http://www.ysharing.com/es/file/220/rcS-rar.html

VIARK SAT 4K : ES EL DECODIFICADOR DE SATÉLITE ULTRA HD MAS COMPLETO DEL MERCADO, EL MÁS DESTACADO DE LA MEJOR MARCA

 



PadreDeFamilia
!! ADVERTENCIAS !!: Las informaciones aquí publicadas NO CONTIENEN KEYS para la decodificación de ningún sistema: NO SON OPERATIVOS en sistemas SAT que precisen de su correspondiente suscripción. ESTA TOTALMENTE PROHIBIDO EL USO DE ESTAS INFORMACIONES PARA LA MODIFICACIÓN O DEFRAUDACIÓN DE SISTEMAS DE ACCESO CONDICIONAL. EN ESTOS FOROS NO SE PERMITE LA PUBLICACIÓN DE INFORMACIONES ILEGALES POR PARTE DE LOS USUARIOS. EN CASO DE DETECTARSE ESTE TIPO DE INFORMACIONES, LOS USUARIOS SERÁN EXCLUIDOS DE ESTAS PÁGINAS.
PROHIBIDA LA PUBLICACIÓN DE ENLACES A FIRMWARES ILEGALES
LOS FOROS NO SON MONITORIZADOS DE MANERA CONSTANTE, CUALQUIER INFORMACIÓN QUE PUEDAS CONSIDERAR ILEGAL REPORTALA A LA ADMINISTACIÓN DEL FORO