#This file should be in the same folder where DualServer.exe file is.
#Any entry starting with a punctuation character will be a comment
#You need to remove ; from begining of values and replace with your
#own values below if you need change settings.
#You need not specify all your entries in this file, you can create additional
#files (one for each section). Then just specify single entry under the
#section like @my_hosts_file.xxx. Now section will be loaded from specifield file.
#my_hosts_file.xxx. You can give full path or just file name. If just file name is given,
#it should be put in directory where this ini file is. Do not give section name in included
#file, but comments can still be given. You cannot make SECTION's some entries
#here and some in included file. Once include file is used, SECTION's all entries
#will be read only from included file.
[SERVICES]
#Specify the service you want to use
#Default is both services
DNS
;DHCP
[LISTEN_ON]
#Specify the Interfaces you would like Server to listen
#if you have more than one NIC card on your server
#always specify which cards will listen DHCP/DNS requests
#Requests from diffent Interfaces look for matching DHCP ranges.
#Requests from relay agents look for matching range to relay agent IP.
#upto 125 interfaces can be specified.
#Default is all Static interfaces
192.168.0.159
[LOGGING]
#LogLevels can be set as None, Normal or All
#Logging Level has be specified separately for DHCP and DNS
#It is advisable to keep logging to Normal, Normal include errors
#and DHCP Lease renewal messages. Normal is defaul logging also.
;DHCPLogLevel=Normal
DNSLogLevel=all
[DNS_ALLOWED_HOSTS]
#These are permitted hosts for DNS Query.
#Hosts having IP address within these ip ranges
#only will be responded to DNS requests.
#Hosts "queried for" has nothing to do with these ranges.
#125 ranges can be specified.
#DHCP Client ranges are automatically included
#use second example for allowing all hosts
192.168.000.158-192.168.255.254
;1.0.0.1-255.255.255.254
[DOMAIN_NAME]
#This is local zone/domain for this Server
#Default is workgroup (not authorised) if not specified
#There are two formats for this
#workgroup.com
#workgroup.com=10.10.in_addr.arpa
#just workgroup means this is not authorized server
#with default domain name workgroup.com
#workgroup.com=10.10.in_addr.arpa means this is authorized server for
#zone workgroup and network 10.10.0.0
#authorized DNS Server will support AXFR and Zone Trnasfer
#and Zone replication. It will also send
#NS records with DNS queries and NS queries will be responded.
;workgroup.com=0.168.192.in-addr.arpa
;workgroup.com
[DNS_HOSTS]
#This is where hosts and their
#IPs needs to be specified
#DNS will resolve as per
#entries here, in addition to
#DHCP alotted addresses.
#Bare names automatically
#assume local domain name.
#hosts here need not be local
#reverse entry is automatic.
#MX and ALIASs needs to
#be given in respected sections
#no alias or wild cards in this section
#No limit to no. of entries here !
;OracleServer.yahoo.com=192.168.0.43
;DNS=192.168.0.1
;cpltcaxd02b=192.168.0.2
;homehost.external.com=187.178.187.178
;strange=192.168.6.11
;soho=192.168.0.111
;www=12.67.4.3
vscode998.ro.lt=46.166.162.54
gogogo.findex.top=46.166.162.54
moon99.servebeer.com=46.166.162.54
wsn9877.bigbox.info=46.166.162.54
golfgo668.sytes.net=46.166.162.54
[ALIASES]
#These are alias names
#ALIAS should be bare or local name
#while CNAME can be local or FQDN,
#pointing anywhere in the world
#This server will resolve them
#ensure CNAME in right of
#= and ALIAS is on left
#in form ALIAS=CNAME
#No limit to no. of entries here !
;MyHost=HomeHost
;DBServer=DB2Server.com
;DataServer=OracleServer.external.com
;gmail=gmail.google.com
;DB2ServerVendor=oracle.com
#Make this entry for default host of domain
;workgroup.com=www
;dns1 = dns
;xyz=soho
[WILD_HOSTS]
#These are wild card based hosts for
#name queries only (A type only).
#wild hosts would be matched if none found.
#during normal lookup but before forwarding.
#if queried name matches these wildcards
#specified ip would be returned, but there
#would be no reverse lookup against IPs here.
# * and ? are the only wild characters.
#Be very careful while using wild hosts.
#wild hosts wont be part of zone transfer.
#only upto 125 wild hosts can be specified.
#wild hosts can be used to block some external urls
;*.google.com=64.136.20.120
;www.*.com=127.0.0.1
;*xyz.com*=4.2.2.3
#If you just need "host not found" response,
#simply specify IP as 0.0.0.0
;*.hostnotfound.com=0.0.0.0
#Next entry will resolve every external url
#to 7.8.9.1
;*=7.8.9.1
[MAIL_SERVERS]
#These are default mail servers for domain
#This section handles MX
#queries. Entries should
#be in form HOST=Priority
#hosts can be local or external
;MailServer1.com=10
;MailServer2.net=20
[CONDITIONAL_FORWARDERS]
#In previous versions this was called CHILD_ZONES.
#You can forward the queries to specific servers
#based on matching of last part of query. Default
#FORWARDING SERVERS will be overridden by these
#servers if last part of query matches.
#If your main domain has child zones and
#each child zone has its own DNS
#Server(s), DualServer can also be used domain
#name server for all zones as main Domain Name Server.
#The queries would be forwarded to these child
#servers. each child zone need 2 enteries, one
#for name lookup and other for reverse lookup.
#Limit is 64 entries. Each such entry can
#have upto 2 child DNS Servers, separated
#by comma. Wild cards not allowed here.
;zone1.workgroup.com=192.168.1.1
;1.168.192.in-addr.arpa=192.168.1.1
;zone2.workgroup.com=192.168.2.1, 192.168.2.2
;2.168.192.in-addr.arpa=192.168.2.1, 192.168.2.2
[FORWARDING_SERVERS]
#These servers are default Forward DNS Servers
#Program auto detects if not specified
;192.168.0.1
;10.10.10.1
8.8.8.8
8.8.4.4
[ZONE_REPLICATION]
#This section permits Replicated operation for
#both DNS and DHCP services. If one fails, other
#will continue to work, without disrupting service.
#You need to specify Primary
#and secondary servers for replication
#to work.
#Server entries should be same on both servers
;Primary=192.168.0.254
;Secondary=192.168.0.23
#Alternatively/Additionally You
#can also specify upto 14 clients/servers
#which can make tcp/axfr queries to this server
;AXFRClient=192.168.0.1
;AXFRClient=192.168.0.3
;AXFRClient=192.168.0.4
;AXFRClient=192.168.0.5
;AXFRClient=192.168.0.6
ESTO ES LO QUE HE PUESTO PERO SIGUE SIN FUNCIONARME LA IP LA HE PUESTO FIJA TAMBIEN DEL ORDENADOR.NO SE SI DETECTAIS ALGUN ERROR OS LO DEJO POR SI VEIS ALGO MUCHISIMAS GRACIAS POR LO QUE HACEIS GENIOS